Notice - Philips D275 User Manual

19 Notice

Declaration of conformity
Hereby, TP Vision Europe B.V. declares that the
product is in compliance with the essential
requirements and other relevant provisions
of RED Directive 2014/53/EU and UK Radio
Equipment Regulations SI 2017 No.1206. You
can find the Declaration of Conformity on
www.philips.com/support.
Use GAP standard compliance
The GAP standard guarantees that all DECT™
GAP handsets and base stations comply with
a minimum operating standard irrespective of
their make. The handset and base station are
GAP compliant, which means they guarantee
the minimum functions: register a handset,
take the line, make a call and receive a call.
The advanced features may not be available
if you use them with other makes. To register
and use this handset with a GAP compliant
base station of different make, first follow the
procedure described in the manufacturer's
instructions, then follow the procedure
described in this manual for registering a
handset. To register a handset from different
make to the base station, put the base
station in registration mode, then follow
the procedure described in the handset
manufacturer's instructions.
Compliance with EMF
This product complies with all applicable
standards and regulations regarding exposure
to electromagnetic fields.
EN 42
Disposal of your old product and
battery
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
This symbol on a product means that the
product is covered by European Directive
2012/19/EU.
This symbol means that the product contains
batteries covered by European Directive
2013/56/EU which cannot be disposed of
with normal household waste.
Inform yourself about the local separate
collection system for electrical and electronic
products and batteries. Follow local rules and
never dispose of the product and batteries
with normal household
disposal of old products and batteries helps
prevent negative consequences for the
environment and human health.
Removing the disposable batteries
To remove the disposable batteries, see
Section 'Install the supplied batteries'.
When this logo is attached to a product,
it means a financial contribution has been
paid to the associated national recovery and
recycling system.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and
old equipment.
waste. Correct