Inputs - Mitsubishi Electric Unisen 154 Series Owner's Manual

Inputs

Inputs Name
INPUT and HDMI jacks:
Cable box, Cam(corder), CD,
DVD (DVD, DVD2, Blu-ray), DVR,
Game (Game, PS, Xbox, Wii),
Media Box, PC, Satellite, AVR
On/Off (ANT, Bluetooth only)
INPUT jacks only:
CD/Audio, MP3 Player, VCR
HDMI jacks only:
PC, AVR, Delete
General Notes for the Inputs > Name Menu
When you change an input name and then exit the
Name menu:
• The name is changed
• The icon in the
• Audio and video settings are changed to the
defaults for the new device type.
265 Series:
• All previous NetCommand IR "learn-
ing" for the input is erased.
Notes for HDMI devices
• Disconnecting an HDMI device:
nect an HDMI device, the icon remains in the Input
Selection menu until you remove it. Select Delete in
the Inputs > Name menu to remove an unwanted icon
for an HDMI input.
Inputs Learn
Inputs AVR
HDMI
Inputs Control
Downloaded From TV-Manual.com Manuals
• Lets you assign or
tion menu. Highlight an input and press ENTER multiple times to cycle
through the name choices.
• Lets you turn the
in the Input Selection menu; highlight the input and press ENTER to switch
between On and Off. A paired device is cleared from memory when the
Bluetooth icon is turned off.
• Lets you delete unused HDMI inputs from the
• A CEC-enabled tuner can be named either
• A CEC-enabled DVD player can be named
Input Selection menu is changed
When you discon-
265 Series. Sets up or changes NetCommand IR control of the current device.
See "About NetCommand IR Control," page 60.
265 Series. Sets up or changes NetCommand IR control of an A/V receiver.
See "NetCommand IR Control of an A/V Receiver" on page 67.
Select On or Off to enable or disable the TV's control of a CEC-enabled
On, Off
device. See Appendix C for use of this feature.
Get other manuals https://www.bkmanuals.com
4. TV Menus
change names of inputs appearing in the Input Selec-
Ant and Bluetooth inputs On/Off to display or hide them
DVD, DVD2, or Blu-ray.
• If the New Device Found screen does not display
as expected when you connect an HDMI device,
see "Reactivating Auto Input Sensing for an HDMI
Input," page 15.
HDMI Control and CEC-Enabled Devices:
•
Appendix C, "HDMI Control of CEC Devices," page
81.
• If case of CEC conflicts:
one of these ways:
- Turn off the TV's HDMI Control signals to the
device (Inputs > HDMI Control menu).
- Turn off each device's internal CEC capability.
See Appendix C for the TV's HDMI Control or, to
turn on/off a specific device's response to CEC
signals, see the device owner's manual.
For assistance call 1(800) 332-2119
Input Selection menu.
Cable Box or Satellite.
Turn off CEC signals in
55
See