Mitsubishi Electric Unisen 154 Series Owner's Manual page 83

Appendix C: HDMI Control of CEC Devices, continued
Resolving CEC Conflicts
Because each manufacturer selects which CEC func-
tions to support, some devices can conflict with other
devices. If control conflicts arise, you can:
• Turn off TV control of an individual CEC-enabled
device (see below).
• Turn off CEC in the setup menu of one of the
devices.
Turning Off the TV's HDMI Control of a CEC Device
1.
Press MENU on the TV remote control.
2.
Highlight Inputs > HDMI Control.
3.
Move to the device name and press
Off to turn off the TV's ability to control the device.
4.
Press EXIT to clear the menu.
Inputs > HDMI Control menu
Removing an HDMI Device
1.
Power off the device.
2.
Disconnect the HDMI cable.
3.
Press MENU on the TV remote control to enter the
TV main menu.
4.
Go to Inputs > Name.
5.
Highlight the HDMI input name and press
select Delete.
6.
EXIT to clear the menus.
Press
Inputs > Name menu with Delete selected for HDMI-3.
Downloaded From TV-Manual.com Manuals
Using HDMI Control
As an example of using HDMI Control, press PLAY on
the device itself to:
•
•
•
Direct Keys
Test your equipment with the TV's remote control to
find additional supported commands. See the table
below for commands that may be available, depending
on the individual device.
ENTER to select
CEC-enabled VCR, DVD, and DVR functions that
may be available:
Record/
Playback
If you have a CEC-enabled A/V receiver, CEC-enabled
devices connected to the A/V receiver with an HDMI
cable may also be controllable. They can be selected
from the TV's Input Selection menu.
CEC-enabled A/V receiver functions that may be
available:
•
•
ENTER to
Get other manuals https://www.bkmanuals.com
Appendices
Power on the TV
Switch to the device (no need to display the
Input Selection menu)
Begin play of the device
Menu Channel
Navigation
Digits 0–9,
ENTER
CANCEL
(to cancel)
Try the VOL, MUTE, and menu-navigation keys.
To open the A/V receiver menu, follow these steps:
1. While watching TV, press
2. Press until the TV Speakers option displays.
3. to select Off (to send audio to the A/V
Press
receiver).
4. INPUT and highlight the A/V receiver icon
Press
in the Input Selection menu.
5. TOOLS.
Press
6. Select Menu from the Tools menu.
For assistance call 1(800) 332-2119
83
Other
Tuning
CH GUIDE
TOOLS
CANCEL
Check the
TOOLS menu
for supported
ENTER
functions.
AUDIO.