Photos And Motion Video As Composite Video; Using An Audio-Only Device - Mitsubishi Electric Unisen 154 Series Owner's Manual

36
3. TV Features
Camera Images and Music Files, continued
Photos and Motion Video as Composite
Video
Connect the camera to the TV using a composite video
cable and control the slide show or movie through the
camera. The display resolution will be standard-defini-
tion (480i).
1.
Refer to the owner's manual supplied with the
camera for instructions needed for this setup.
2.
Set the camera's output signal type to
put the camera into playback mode.
3.
With the camera still turned on, connect your digital
camera's composite video cable (usually yellow) to
the TV's Y/VIDEO jack. To hear audio, connect the
camera's audio output cable to the AUDIO L jack.
Optional
Audio Cable
Camera connection using a composite video cable
4.
When the New Device Found screen displays,
assign the name Camcorder.
5.
Press EXIT to close the New Device Found screen.
6.
Highlight the icon for the camera input and press
ENTER.
7.
If viewing photos, control the slideshow from the
camera. Advance through the images manually or
check if the camera can advance automatically.
Downloaded From TV-Manual.com Manuals
For assistance call 1(800) 332-2119

Using an Audio-Only Device

To use the TV speakers with an audio device such as an
MP3 or CD player with analog output, follow these steps.
1.
2.
NTSC and
3.
4.
TV
Get other manuals https://www.bkmanuals.com
Insert an unused RCA-style connector into the
Y/VIDEO jack associated with the TV's analog audio
input. The presence of this connector activates the
TV's auto-detection.
When the TV detects the Y/VIDEO connector, it will
display the New Device Found screen. Name the
new input CD/Audio or MP3 Player.
Connect left (white) and right (red) audio cables from
AUDIO OUT on the device to AUDIO L and R on the TV.
Keep the connector in the
the audio-only device.
Audio-only
device
2.
Unused
RCA-style plug
(plug in first)
VIDEO/Y jack while using
TV
1.
AU
C
V