Project Source W3012B Assembly Instruction Manual page 9

ASSEMBLY INSTRUCTIONS
10. Using a phillips head screwdriver, secure the
drawer box with csk screws 1 ½" as shown in the
illustration. Be careful not to over-tighten as this
may damage the product.
Hardware Used
GG CSK screw 1 1/2"
11. Mount the door on the cabinet by connecting the
hinges on the door to the mounting plates on
the box. Use the hinge guide below for detailed
instructions.
If the adjustments to the door are needed,
instructions are available on page 10 of this manual.
Hinge guide
105 o Hinge
12. YOU'RE FINISHED – ENJOY
10
x 2
11
12
9