Initializing The Headset To Restore Factory Settings - Sony WH-XB900N Help Manual
Wireless noise canceling stereo headset
Hide thumbs
Also See for WH-XB900N:
- Quick start manual (2 pages) ,
- Reference manual (10 pages) ,
- Service manual (22 pages)
Table of Contents
Advertisement
Help Guide
Wireless Noise Canceling Stereo Headset
WH-XB900N
Initializing the headset to restore factory settings
If the headset does not operate correctly even after resetting, initialize the headset.
Turn off the headset while the USB Type-C cable is disconnected and then press and hold the
CUSTOM button simultaneously for 7 seconds or more.
The indicator (blue) flashes 4 times (
etc., and deletes all pairing information. In this case, delete the pairing information for the headset from the device and
then pair them again.
If the headset does not operate correctly even after initializing, consult your nearest Sony dealer.
Note
If you have updated the software after purchasing the headset, even if you initialize the headset, the software is retained updated.
Even if you initialize the headset after changing the language of voice guidance, the language will not be changed.
), and the headset is initialized. This operation resets volume settings,
4-748-075-11(1) Copyright 2019 Sony Corporation
124
button and the
Advertisement
Table of Contents
