Introduction Function overview With the Mono Bluetooth® Headset, you can control incoming and outgoing phone calls while you listen to music from your device. You can connect your Bluetooth® headset to two Bluetooth® devices at the same time so that you can receive calls from two devices without having to disconnect and reconnect.
Turn off the headset. Headset: Press and hold down the Power key until a green notification light starts flashing rapidly. Bluetooth® device: Scan for Bluetooth® devices, then select MBH20 in the list of available devices. Bluetooth® device: Follow the pairing instructions that appear.
Pair and connect your headset to the second Bluetooth® device. The first Bluetooth® device: To reconnect the headset, select MBH20 in the list of paired devices on the Bluetooth® settings screen. To switch between the Multipoint mode and Singlepoint mode Make sure that the headset is turned off.
Resetting the headset To reset the headset Make sure that the headset is turned off. Press and hold down the Power key for more than 8 seconds until the notification light turns green for the second time and starts flashing rapidly. This is an Internet version of this publication.
Troubleshooting I cannot answer a second call • Make sure that your calling device supports the Bluetooth® headset profile. • Make sure that the correct calling device is selected. I cannot pair a second Bluetooth® device • Make sure that the Multipoint mode is activated. The headset turns off automatically •...
Prior to use, please read the Important information leaflet separately provided. This User guide is published by Sony Mobile Communications AB or its local affiliated company, without any warranty. Improvements and changes to this User guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Sony Mobile Communications AB at any time and without notice.
• Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. AVISO IMPORTANTE PARA MÉXICO La operación de este equipo está...
Need help?
Do you have a question about the MBH20 and is the answer not in the manual?
Questions and answers