Download  Print this page

Sony LF-X1 Troubleshooting Manual page 3

Sony lf-x1 digital multimedia broadcaster: user guide
Hide thumbs

Advertisement

Q: Images from a connected device do not appear. Also, I can't get any TV channels to
appear. What's the problem?
A: You should first check to make sure that there is no problem with the broadcast signal or
your TV signal connections. If both of these check out then review the following possible
causes and solutions to your problem:
The built-in NTSC tuner (in the Base Station) supports cable TV channels 1 to
125. If you want to watch other channels or the channel signal is scrambled,
connect a cable set top box to the video input terminal on the Base Station.
Check to make sure that your connection cables are firmly attached to the Base
Station.
Check that the connections to the red, white, yellow, and S-Video jacks are
correct.
Non-interlace signals from computers or other equipment cannot be displayed.
Make sure the connected device is plugged into the correct input terminal
Make sure you have not plugged the connected device to the video output
terminal. It should be connected to the video input 1 or 2 terminals.
After verifying that the "Cable" is set to "On", run automatic channel preset again.
When connecting a STB or other device by antenna cable, switch to channel 3 or
4 on the STB to display the image from it. For channels other than 3 or 4, select
"TV" from "Settings" > TV/Video > Remote Settings, and after temporarily
selecting the internal TV tuner, change to channel 3 or 4 with the on-screen
remote. With the LF-X1, you can also change the channel using a Sony brand TV
remote control (not supplied).
Q: Why doesn't my On-screen Remote work?
A: There are several different solutions to your problem:
Make sure you have the IR Blaster connected properly to the IR BLASTER port
on the Base Station.
Press some of the buttons on the connected device itself to make sure that it is
functioning independent of the On-screen Remote. (Some devices cannot be
operated, or can only be partially operated, by the On-screen Remote.)
The On-screen remote function supports AV players from most major brands. It
is possible that the AV player you are trying to connect is not supported.
Make sure the IR Blaster is installed so that it faces the infrared receiver
correctly.
Move the device's infrared receiver away from any bright light, such as a
fluorescent light or direct sunlight.
The On-screen Remote may not work properly when the connection between the
Monitor and Base Station is poor. Move closer to the Base Station and try again.
Reprogram the On-screen Remote control settings. (Some devices cannot be
operated, or can only be partially operated, by the On-screen Remote.)
Make sure the remote control settings for "Video 1" and "Video 2" are configured
correctly in the "Remote Settings" window.
Q: I read that the AV Remote Function works for AV players from "most major brands." If
my AV player is not supported, is there anything I can do?
A: Please check the "Product Updates" at www.Sony.com/locationfree/ownerslounge. While
SONY cannot guarantee to support every AV player in the market. From time to time
Sony may provide links to download available software updates for your particular AV
player.
Q: I don't seem to be able to control the external TV tuner that I'm connected to with the
On-screen Remote Control. What could be the problem?

Advertisement

Table of Contents
loading

  Related Manuals for Sony LF-X1