Fisher & Paykel SINGLE DISHDRAWER DD60SC9 Installation Manual page 11

1
B
A
2
3
SECURE TO CABINETRY VIA BRACKETS (METHOD A)
Secure all four side brackets to the
DishDrawer™ Dishwasher, aligning
bracket A with slot A and bracket B
A
with slot B.
Ensure the ends of the brackets are not
B pushed into the chassis.
Push the product into the cavity, pulling
the hoses through as you push to avoid
crushing or twisting them.
Push the product in the positions
illustrated to avoid denting the door.
Partially open the drawer and
remove the first screw cover from
the trim moulding.
4
5
Secure to cabinetry via the brackets.
Pre-drilling a pilot hole may be required
depending on the cabinetry material.
Replace the trim cover and repeat for
the remaining brackets.
11