Table of Contents
Advertisement
WARNING!
!
Electric Shock Hazard
Failure to follow this advice may result in
electrical shock or death.
• Before installing the DishDrawer, remove the
house fuse or open the circuit breaker.
• This appliance must be earthed. In the event
of a malfunction or breakdown, earthing will
reduce the risk of electric shock by providing a
path of least resistance for electric current. This
appliance is equipped with a cord having an
equipment-earthing conductor and an earthing
plug.
• The plug must be plugged into an appropriate
outlet that is installed and earthed in accordance
with all local codes and ordinances.
• WARNING - Improper connection of the
equipment-earthing conductor can result in a
risk of electric shock. Check with a qualified
electrician or service representative if you are in
doubt as to whether the appliance is properly
earthed.
• Do not modify the power supply plug provided
with the appliance - if it will not fit the outlet,
have a proper outlet installed by a qualified
electrician. Do not use an extension cord, adapter
plug or multiple outlet box.
WARNING!
!
Cut Hazard
Failure to use caution could result in injury.
• Take care - panel edges are sharp.
SAFETY AND WARNINGS
WARNING!
To reduce the risk of fire, injury to persons or damage when using the appliance, follow the
important safety instructions listed below. Read all the guidance before using the appliance.
Servicing
Do not repair or replace any part of the appliance unless specifically recommended in
z
this guide. All other servicing should be undertaken be a Fisher & Paykel trained and
supported service technician or qualified person.
Installation
Installation of this DishDrawer requires basic mechanical and electrical skills.
z
Installation must comply with your local building and electricity regulations.
z
Remove all packaging materials supplied with the dishwasher.
z
Be sure to leave these Instructions with the Customer.
z
At the completion of the installation, the Installer must perform the Final Checklist.
z
This dishwasher is manufactured for indoor use only.
z
Ensure all water connections are turned OFF. It is the responsibility of the plumber and
z
electrician to ensure that each installation complies with all Codes and Regulations.
The DishDrawer MUST be installed to allow for future removal from the enclosure if
z
service is required.
The switched power outlet must be outside the dishwasher cavity, so that it is
z
accessible after installation.
Care should be taken when the appliance is installed or removed to reduce the
z
likelihood of damage to the power supply cord and hoses.
If the DishDrawer is relocated from one installation site to another it must be kept
z
upright to avoid damage from water spillage.
Ensure only supplied hoses are used for connection. Old hoses should not be reused.
z
Failure to install correctly could invalidate any warranty or liability claims.
z
If the product is installed in a motor vehicle, boat or similar mobile facility, you must
z
bring the vehicle, boat or mobile facility containing the product to the service shop at
your expense or pay the service technician's travel to the location of the product.
This appliance is fitted with a water heating feature and intended for connection to a
z
hot water supply.
SAVE THESE INSTRUCTIONS
The models shown in this installation guide may not be available in all markets and are subject to
change at any time. For current details about model and specification availability in your country,
please go to our website www.fisherpaykel.com or contact your local Fisher & Paykel dealer.
3
Advertisement
Table of Contents
