Advertisement
Quick Links
Advertisement
Related Manuals for WÄRTSILÄ W-X62
Summary of Contents for WÄRTSILÄ W-X62
- Page 1 W-X62 Maintenance Manual “Marine” Vessel: Type: Engine No.: Document ID: DBAD070428 Wärtsilä Switzerland Ltd 24hrs Support: +41 52 262 80 10 PO Box 414 technicalsupport.chts@wartsila.com CH-8401 Winterthur Switzerland E 2014 Wärtsilä Switzerland Ltd, Printed in Switzerland...
- Page 2 E 2014-08 Wärtsilä Switzerland Ltd., Printed in Switzerland – All rights reserved No part of this publication may be reproduced or copied in any form or by any means (electron- ic, mechanical, graphic, photocopying, recording, taping or other information retrieval systems) without the prior written permission of the copyright holder.
- Page 3 Modification Service Engine Documentation W-X62 Summary for Maintenance Manual Page No. Modification Title Subject Page or (MM) Date Manual new exch. 2014 Maintenance Manual, Issue 2014 Date of publication 2014-06-02 0380-1/A1 (2) 2014-08 Overhaul intervals New overhaul times for injection valve.
- Page 4 Intentionally blank...
- Page 5 General Information Bedplate and Tie Rod Cylinder Liner and Cylinder Cover Crankshaft, Connecting Rod and Piston Driving Wheels and Shut-off Valve for Starting Air Supply Unit, Injection and Exhaust Valve Control Scavenge Air Receiver and Auxiliary Blower Cylinder Lubrication Piping Crank Angle Sensor Unit, Tools...
- Page 6 Intentionally blank...
- Page 7 W-X62 Group0 Maintenance General Information Group 0 For Particular Attention ..............
- Page 8 Intentionally blank...
-
Page 9: For Your Attention
W-X62 0000−1/A1 Maintenance For Your Attention General This manual is for the operator and is for use only for the related type of diesel engine (the engine described in this manual). The data in this manual is confidential. Make sure that you read carefully the Operation Manual before you operate the engine. - Page 10 Intentionally blank...
- Page 11 W-X62 0001−1/A1 Maintenance Preface The instructions contained in this ”Maintenance Manual” are intended to help to ensure that the maintenance which must be carried out at specific intervals is correctly carried out. It is a precondition that the personnel charged with such important work possesses the necessary training and experience.
- Page 12 Intentionally blank...
- Page 13 W-X62 0002−1/A1 Maintenance Table of Contents Table of Contents General Information Group 0 For Particular Attention ..............
-
Page 14: Crankshaft, Connecting Rod And Piston
W-X62 0002−1/A1 Maintenance Table of Contents Cylinder Liner and Cylinder Cover Group 2 Cylinder Liner Measuring Bore Wear .............. -
Page 15: Scavenge Air Receiver And Auxiliary Blower
W-X62 0002−1/A1 Maintenance Table of Contents Driving Wheels and Shut-off Valve for Starting Air Group 4 Driving Wheels Running and Backlash Clearances and Tooth Condition ........ - Page 16 W-X62 0002−1/A1 Maintenance Table of Contents Crank Angle Sensor Unit, Tools Group 9 Crank Angle Sensor Unit: Replacement of Proximity Sensor .......
- Page 17 W-X62 0008−1/A1 Maintenance General Engine Numbering and Designations Turbocharger 1 Turbocharger 2 Auxiliary Auxiliary Blower 1 Blower 2 Cylinder Numbering DRIVING END FREE END Main Bearing Numbering Fig. 1 Thrust Bearing Pads Rail Unit FUEL EXHAUST SIDE SIDE Supply Unit...
Need help?
Do you have a question about the W-X62 and is the answer not in the manual?
Questions and answers