Call Data Block Routing Block (Cdbrteb) - Northern Telecom DISPCALL DMS-100 Series User Manual

5-32 Interpreting DISPCALL output
•
•
•
•

Call data block routing block (CDBRTEB)

Call Data Block Routing Block (CDBRTEB) contains data concerning how
the call routed to the terminator. Information contained in this area can
indicate whether a call failed during routing. The fields are as follows:
GROUP_CPID Call Processing Identifier of the terminating group.
TERMINAL_CPID Call Processing Identifier of the terminating terminal.
CONNECTION_TYPE type of connection; one of:
•
•
•
REROUTE ELEMENT a boolean set to true if the previous route element
was a reroute element.
CST_L boolean indicating whether the class of tone is low.
CST_H boolean indicating whether the class of tone is high.
RECREATE_CDBRTEB boolean indicating whether the Call Data
Block Routing Block is valid. If the CDBRTEB is NIL, the field is set to
true.
ERWT_ACCEPTED boolean indicating whether the caller has accepted
an expensive route.
WAIT_FOR_COT_TO_TERMINATE boolean used by CCIS6 trunks to
delay termination to lines until a voice path is established.
GRPSC boolean indicating the group speed calling option.
FAST PROC causes calls to enter a streamlined processing environment
from the cross processor. This field is initialized to NOT FAST. Possible
values are as follows:
•
•
•
TAM-1001-003 Standard 3.01 July 1992
7 - NCIT
8 - NCIM
9 - NCON
10 - NCOF.
direct
alternate
tandem.
0 - not fast
1 - fast possible
2 - intertoll to intertoll