About This Document; When To Use This Document; How To Identify The Software In Your Office - Northern Telecom DISPCALL DMS-100 Series User Manual

Hide thumbs Also See for DISPCALL DMS-100 Series:

Table of Contents

About this document

The DISPCALL utility captures all available data associated with the death

of a call or a call that is being held for trouble analysis. The formatted

output displays the Call Condense Block (CCB) and the Call Data Block

(CDB). DISPCALL can also be used to capture and display data about calls

in progress.

Northern Telecom (NT) software releases are referred to as batch change

supplements (BCS) and are identified by a number, for example, BCS29.

This document is written for DMS-100 Family offices that have BCS34 and

up.

More than one version of this document may exist. The version and issue

are indicated throughout the document, for example, 01.01. The first two

digits increase by one each time the document content is changed to support

new BCS-related developments. For example, the first release of a

document is 01.01, and the next release of the document in a subsequent

BCS is 02.01. The second two digits increase by one each time a document

is revised and rereleased for the same BCS.

To determine which version of this document applies to the BCS in your

office, check the release information in DMS-100 Family Guide to Northern

Telecom Publications, 297-1001-001.

The Office Feature Record (D190) lists your current BCS and the NT

feature packages in it. You can view similar information on a MAP

(maintenance and administration position) terminal by typing

>PATCHER;INFORM LIST ;LEAVE

and pressing the Enter key.

DISPCALL user Guide Technical Assistance Manual BCS34 and up

Table of Contents

Do you have a question about the DISPCALL DMS-100 Series and is the answer not in the manual?