Northern Telecom DISPCALL DMS-100 Series User Manual page 65

RC translation return code. The return codes are as follows:
•
0: XLA_MORE_DIGITS more digits are required to complete
•
1: XLA_CONTINUE
•
2: XLA_COMPLETE
•
3: XLA_ROUTE_SET
•
4: XLA_POS_SET
•
5: XLA_TRMT_SET
•
6: XLA_RESTART
•
7: XLA_PROTOCOL
•
8: XLA_WAIT
•
9: XLA_REENTER
•
10: XLA_DBQUERY_RQDfor Service Switching Point (SSP) features,
•
11: XLA_STOP_DGCOL call processing stops digit collection and
TXSEL translation selector, one of:
•
0: NIL_XLA_SELECTOR
•
1: SCCF_UPD
•
2: PRETRANSLATION_SELECTOR
•
3: HNPA_XLA_SELECTOR
•
4: INWO_XLA_SELECTOR
•
5: INWT_XLA_SELECTOR
•
6: INWS_XLA_SELECTOR
•
7: INWC_XLA_SELECTOR
•
8: DDO_XLA_SELECTOR
•
9: AMDIG_XLA_SELECTOR
•
10: CCTRNSL_XLA_SELECTOR
•
11: INPRTRNS_XLA_SELECTOR
•
12: NSC_XLA_SELECTOR.
DISPCALL user Guide Technical Assistance Manual BCS34 and up
Interpreting DISPCALL output 5-17
translations at the current translation step.
the current translation step is complete.
Translations continues with the next step.
translation is complete.
route identifier determined.
route identifier determined, but the
position must be decoded.
treatment will be decoded.
begin digit collection again.
analyze protocol.
call condenses and waits for another event,
such as wait for equal access ANI or called
number.
reenter translations with a new translation
result.
proceed to setup. Retranslation required
after DB query.
sets Automatic Data Processing (ADP).
Reenter translations.