Northern Telecom DISPCALL DMS-100 Series User Manual page 73

QUEUEING_ACTIVE boolean indicating whether queueing was in
process.
OHQ boolean indicating whether to allow queueing.
CANCSTDL boolean indicating whether to cancel standard outpulsing
logic.
INHIBIT_QUEUEING boolean indicating whether no queuing is allowed.
HUNT a boolean, when set to false, suppresses terminators from
advancing through the member list.
TRMT treatment.
POS Position.
TFR Termination failed reason, one of the following:
•
0: NIL_TFR - initialized value
•
1: NOT_AVAILABLE_TFR - no idle outgoing circuits available for
terminating the call
•
2: GROUP_CONGESTION_TFR - the connecting switcher is unable to
complete the call; no idle circuits available
•
3: SWITCH_CONGESTION_TFR - the connecting switcher is unable
to connect the call through its office
•
4: SUB_CONGESTION_TFR - the subscribers equipment is
unavailable for termination
•
5: NO_CONGESTION_TFR - no failure.
ANI_SPILL ANI spill required; boolean.
ANI_SPILL_9 a boolean, when set to Y the identification digit 9 is to be
outpulsed on intercept calls.
RECORDING_REQD boolean indicating whether billing details are
required.
TS_OMREG traffic separation operational measurement register.
SEIZE_FAILURE boolean indicating whether an attempt to seize an
outgoing agent has failed.
AC_FTR_IN_EFFECT boolean indicating whether and Attendant
Console Feature in effect.
DISPCALL user Guide Technical Assistance Manual BCS34 and up
Interpreting DISPCALL output 5-25