Clear - Northern Telecom DISPCALL DMS-100 Series User Manual

Function
Use the clear command to clear all the buffers of their contents.
clear command parameters and variables
Command Parameters and variables

clear

Qualifications
None
Examples
The following table shows examples of the clear command.
Examples of the clear command
Example Task, response, and explanation
clear
and pressing the Enter key. ↵
Task:
Response: None. No display appears on the screen.
Explanation:Any buffers that contain information are cleared.
End
Clear all data buffers.
End
DISPCALL user Guide Technical Assistance Manual BCS34 and up
DISPCALL level commands 3-5
clear