Newage 40sqft PVC slatwall - Silver Installation Manual page 24

Corner and Full wall PVC Slatwall Install
When arriving to the extreme opposite end
of the wall, i.e, KIT 4 positioning, tighten
16
screws on bottom PVC Panel, refer step 10
on page 22. Then slide-in the opposite End
Trim.
To continue the install, tilt the PVC panel and insert into the H-Shape Trim on one side and
18
into the End Trim on opposite side, gently bend the profile a little bit as shown and snap
it in behind the opposite trim. NOTE: End Trim - in case of Full wall PVC Slatwall Install, and
Corner Trim - in case of Corner Install.
24
End Trim
Using cordless power drill, tighten the
17
screws onto PVC Slatwall panels and the
End Trim.
(Cont.)
End Trim
TOP VIEW