Remove The Upper Case (With Keyboard) - Lenovo Chromebook 100e 2nd Gen MTK Hardware Maintenance Manual

Hide thumbs Also See for Chromebook 100e 2nd Gen MTK:
Table of Contents

Advertisement

When prompted to log on to the local host, type chronos and press enter.
Step 5.
Type sudo bash and press enter.
Step 6.
Type ectool batterycutoff and press enter.
Step 7.
When the message SUCCESS. The battery has arranged a cut-off and the system should be
Step 8.
shutdown immediately. is printed, disconnect the ac power adapter from the computer and the
computer turns off immediately. If you re-connect the ac power adapter, power supply from the
built-in battery pack will resume.

Remove the upper case (with keyboard)

Step 1.
Remove the 9 screws.
Figure 4. Remove the screws
Screw specifications
M2 5 x 6
Step 2.
Turn over the Chromebook and open the LCD module to 360 degrees.
Step 3.
Use a pry bar to slide through the grooves between the upper case and the keyboard; slowly lift the
keyboard.
Attention: Do not pull up the keyboard before detaching the keyboard and touchpad connectors.
Otherwise the cables may be damaged.
Make sure disassemble the upper case with a pry bar in a particular order as shown below.
34
Hardware Maintenance Manual
Number of screws
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Chromebook 300e 2nd gen mtk

Table of Contents