Figure 21. Remove the screws
Screw specifications
M2.5 x 5
Step 3.
Lift up the LCD module to detach it from the base cover.
The LCD module is not a FRU. Instead, it contains FRUs as its components. Refer to "Disassemble the LCD
module (for 300e MTK)" on page 42 if you need to replace a FRU contained in the LCD module.
LCD module
Disassemble the LCD module (for 300e MTK)
The LCD module as a whole is not a FRU. Instead, it contains FRUs as its components. Before
disassembling the LCD module, make sure it has been detached from the base cover. Refer to "Remove the
LCD module" on page 41 for instructions.
Remove the hinge cover
Make sure the following FRUs (or CRUs) have been removed.
"Remove the upper case (with keyboard)" on page 34
"Remove the LCD module" on page 41
Step 1.
Pry the 2 rubbers off the hinge cover.
Figure 22. Pry the rubbers
Step 2.
Remove the 2 screws.
42
Hardware Maintenance Manual
Number of screws
6