"Remove the upper case (with keyboard)" on page 34
"Remove the battery pack" on page 36
Step 1.
Detach the connector from the power board, and then remove the two screws.
Figure 11. Detach the connector and remove the screws
Screw specifications
M2.0 x 2.5
Step 2.
Remove the speakers.
Figure 12. Remove the speakers
Refer to "Major FRUs and CRUs" on page 28 to look up details about the following replacement parts:
speakers
Remove the power board
Make sure the following FRUs (or CRUs) have been removed.
"Remove the upper case (with keyboard)" on page 34
"Remove the battery pack" on page 36
Step 1.
Detach the two connectors
system board.
38
Hardware Maintenance Manual
Number of screws
2
1 2
, and then remove the cable that connects the power board to the