Projecting S-Video Images; Projecting Component Video Images - Epson EMP-74 User Manual

Connecting to a Video Source

Projecting S-Video Images

Use a commercially-available
To S-Video output port
S-Video cable
(commercially-available)
TIP
If more than one external component is connected to the projector,
after projection starts, press the [S-Video/Video] button on the remote
control or the [Source] button on the projector's control panel until
"S-Video" is displayed in the projected image.
S-Video cable to make the connections.
To [S-Video] port
p.34

Projecting Component Video Images

Use the optional component video
See "Appendices: Optional Accessories"
To component video
output port
Component video cable
(optional)
cable to make the connection.
p.93
To [Computer1/Component
Video1]
or [Computer2/Component
Video2] port (blue)
23