Table of Contents
Advertisement
7.2
Right-side cover
PRIMEA Chapter 07
REV. 02 - Mar. 07
Move the drip tray to the lower limit position.
Disassemble the start pushbutton (E).
Remove the door (F) protecting the connec-
tion socket of the setting device, by means
of a Phillips screwdriver.
Loosen the screws as indicated.
Raise the rear section of the top cover
slightly.
Push the upper section of the right side
cover upwards to release from hooks (C)
from slots (B).
To facilitate release, push the front section of
the cover downwards.
2/22
Advertisement
Table of Contents
