Saeco PRIMEA LINE Technical & Service Manual page 36

- CAPP_DOOR_CLOSED (milk tank door closed). The display indicates E
- CAPP_DOOR_CLOSED+CAPP_PRES (door closed milk tank and cappuccino maker)
- COFFEE_BEANS_DOOR_CLOSED (coffee container lid closed). The display indicates G
- TANK_PRES (water tank) The display indicatesH
Level 2
Check gearmotor moving the unit
- PRESS UP (unit up) The display indicates no. 5 when the upper micro of the gearmotor is enabled.
- PRESS DOWN (unit down) The display indicates no. 6 when the lower micro of the gearmotor is enabled.
Torque absorption is indicated during movement (max 350 mA)
No. 3
Test coffee grinder and pump
- PRESS ESC KEY (the pump starts). The display indicates turbine pulses
- PRESS OK KEY (excites milk tank solenoid valve).
- PRESS AROMA KEY (coffee grinder starts)
- PRESS UP OR DOWN KEY (to vary the aroma)
Level 4
Test water heater and cup warmer
- PRESS THE UP KEY (water tank is filled). The display shows the change to the temperature.
- PRESS THE ESC KEY (cup warmer comes on) You can feel the cup warmer heating up
Level 5
Test multivalve
- PRESS THE UP KEY (position changed in clockwise direction)
- PRESS THE DOWN KEY (the position changes in anticlockwise direction)
- PRESS THE ESC KEY (returns to water position)
Level 6
Test cappuccino maker
- PRESS THE UP KEY (moves to position 0)
- PRESS THE DOWN KEY (moves to position 1)
PRIMEA Chapter 05
REV. 02 - Mar. 07
The display indicates F
The display indicates SOLENOID ACTIVATED and no.3
13/20