Optional Accessories; Maintenance - Makita 3606 Instruction Manual

1
2
3
► 1. Wing bolt (B) 2. Fine adjusting screw 3. Wing bolt
(A) 4. Wing nut (C) 5. Guide roller
When cutting, move the tool with the guide roller riding
the side of the workpiece.
3
► 1. Bit 2. Guide roller 3. Workpiece

MAINTENANCE

CAUTION:
• Always be sure that the tool is switched off and
unplugged before attempting to perform inspec-
tion or maintenance.
• Never use gasoline, benzine, thinner, alcohol
or the like. Discoloration, deformation or cracks
may result.
To maintain product SAFETY and RELIABILITY, repairs,
carbon brush inspection and replacement, any other
maintenance or adjustment should be performed by
Makita Authorized or Factory Service Centers, always
using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION:
•
5
4
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Straight & groove forming bits
• Edge forming bits
• Laminate trimming bits
• Straight guide assembly
1
• Trimmer guide assembly
• Templet guides
• Templet guide adapter
• Lock nut
• Collet cone 1/4"
2
• Wrench 17
NOTE:
•
MAKITA LIMITED WARRANTY
Please refer to the annexed warranty sheet for the
most current warranty terms applicable to this product.
If annexed warranty sheet is not available, refer to the
warranty details set forth at below website for your
respective country.
United States of America: www.makitatools.com
Canada: www.makita.ca
Other countries: www.makita.com
7 ENGLISH
These accessories or attachments are recom-
mended for use with your Makita tool specified
in this manual. The use of any other accessories
or attachments might present a risk of injury to
persons. Only use accessory or attachment for
its stated purpose.
Some items in the list may be included in the
tool package as standard accessories. They
may differ from country to country.