Hill-Rom LI156E Series Technical Manual
  1. Manuals
  2. Brands
  3. Hill-Rom Manuals
  4. Medical Equipment
  5. LI156E Series
  6. Technical manual

Hill-Rom LI156E Series Technical Manual

Evolution bed
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Technical Manual
Evolution Bed LI156Ex
from
Hill-Rom
®
QD1551A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LI156E Series and is the answer not in the manual?

Questions and answers

Related Manuals for Hill-Rom LI156E Series

Summary of Contents for Hill-Rom LI156E Series

  • Page 1 Technical Manual Evolution Bed LI156Ex from Hill-Rom ® QD1551A...
  • Page 2 Note: While every care has been taken to ensure that the information contained in this manual was correct at the time of going to press, Hill-Rom reserves the right to change any details and specifications without prior notice in line with a policy of continual product development.

  • Page 3: Table Of Contents

    Bedside Table Rails (optional) ....1- 10 Simplified general troubleshooting Model identification ........1- 11 method for the LI156Ex ......2- 20 Safety Indications ........1- 12 Identification and warning labels ..1- 13 Evolution Bed LI156Ex Hill-Rom from Technical Manual...
  • Page 4 4- 13 4.18) Head and footboard replacement .. 4- 31 Installation: for all beds ......4- 13 Removal ............. 4- 31 Installation ..........4- 31 Evolution Bed LI156Ex Hill-Rom from Technical Manual...
  • Page 5 Tools and Specific Requirements ....6- 6 5.5 Simple Variable Height: connector 5- 12 5.6 Variable Height: Trendelenburg/Reverse Trendelenburg mechanism ..... 5- 14 5.7 Variable Height Pedal ...... 5- 16 5.8 End of Travel Switch Assembly ..5- 18 Evolution Bed LI156Ex Hill-Rom from Technical Manual...
  • Page 6 ST856A, AC930A, AC903A (SH bed only) ........... 7- 4 7.2.18 AD090A assembly and cabling kit for hand-held control unit: AD091A ..........7- 4 7.2.19 Variable Height pedal kit: AD098A ..........7- 6 Evolution Bed LI156Ex Hill-Rom from Technical Manual...

  • Page 7: Revision Status

    Contents A HILLENBRAND INDUSTRY Rev. 001 Revision status t i T l l i l l i Evolution Bed LI156Ex Hill-Rom from Technical Manual...
  • Page 8 Contents A HILLENBRAND INDUSTRY Rev. 001 Notes: VIII Evolution Bed LI156Ex Hill-Rom from Technical Manual...
  • Page 9 Positions of the bed ........1- 4 General Description ........1- 4 Specifications ..........1- 4 Functional Description ....... 1- 5 Electrical Description ......... 1- 7 Regulatory Requirements ......1- 8 Evolution LI156Ex Bed Hill-Rom 1- 1 from Technical Manual...

  • Page 10: Purpose Of This Manual

    Organisation of this manual This manual provides the information required for the This manual contains seven sections. normal operation and maintenance of the Hill-Rom® Section 1: Introduction Evolution LI156Ex bed. It also includes a complete parts list for ordering replacement components. The You are currently reading Section 1.

  • Page 11: Typographical Conventions Used In This Manual

    WARNING could result in patient or user injury. VH ..........Variable Height • The symbol below highlights an electric shock hazard warning: warning.tif Figure 1-2 - WARNING symbol (Electric shock hazard) Evolution LI156Ex Bed Hill-Rom 1- 3 from Technical Manual...

  • Page 12: Operating Precautions

    150mm (5.9") single band castors 162mm (6.4") Maximum Head Section +68° inclination Knee Section inclination: 16° autocontour Maximum Knee Section +34° inclination 1515Atbl_100 Table 1-1: Specifications of the Evolution LI156Ex Bed 1- 4 Evolution LI156Ex Bed Hill-Rom from Technical Manual...

  • Page 13: Functional Description

    The Variable Height function must be operated by nursing staff only, using the side-rail control or the Variable Height pedal (option or accessory). Evolution LI156Ex Bed Hill-Rom 1- 5 from Technical Manual...
  • Page 14 In this way the bed can be steered extended with the aid of a mattress extension cushion, easily by pushing the foot or head-end of the available as an accessory, when the extension has bedframe. been pulled out. 1- 6 Evolution LI156Ex Bed Hill-Rom from Technical Manual...

  • Page 15: Electrical Description

    Head Section for ease of use. The patient can control the Head and Knee Section functions by pressing the buttons with coloured labels on the two control panels. Nurse side-rail control panels 1512A101.tif Evolution LI156Ex Bed Hill-Rom 1- 7 from Technical Manual...

  • Page 16: Regulatory Requirements

    Waterproof and shockproof motor housing (waterproof level: see Section 3). • Permanent lubrication. CAUTION The cycle of usage (intermittent operation) of the actuators must not exceed 6 min/hour. Otherwise, the equipment may be damaged. 1- 8 Evolution LI156Ex Bed Hill-Rom from Technical Manual...

  • Page 17: General Operation Of The Evolution Li156Ex Bed

    Hold one side of the Head Section and activate meaning that the rails are securely locked. one of the levers situated on either side. • Keep the lever applied to control the lowering of the Head Section. Evolution LI156Ex Bed Hill-Rom 1- 9 from Technical Manual...

  • Page 18: Braking

    Lock out the electric functions of the bed before moving the bed and bedside cabinet to prevent any accidental handling that knocks the bedside cabinet against the frame of the bed. 1- 10 Evolution LI156Ex Bed Hill-Rom from Technical Manual...

  • Page 19: Model Identification

    The bedside cabinet must be removed when the bed has been transported. Evolution LI156Ex Bed Hill-Rom 1- 11 from Technical Manual...

  • Page 20: Safety Indications

    WARNING The brake must always be on when the bed does not need to be moved. The patient may fall when leaning on the bed to climb on or 1- 12 Evolution LI156Ex Bed Hill-Rom from Technical Manual...

  • Page 21: Identification And Warning Labels

    Im Falle eines Stromausfalls kann die Trendelenburgposition nur von der tiesfsten bis zur mittleren H|henposition benutzt werden. 1512A109.wmf Diagram 1.3 Identification and warning labels Evolution LI156Ex Bed Hill-Rom 1- 13 from Technical Manual...
  • Page 22 Introduction A HILLENBRAND INDUSTRY Rev. 001 Notes: 1- 14 Evolution LI156Ex Bed Hill-Rom from Technical Manual...

  • Page 23: Procedures

    2.14 Troubleshooting for side-rails and hand pendant control unit ....2- 17 2.15 Troubleshooting for Variable Height pedal ............. 2- 19 Simplified general troubleshooting method for the LI156Ex ......2- 20 Evolution LI156Ex Bed Hill-Rom 2- 1 from Technical Manual...

  • Page 24: A) Detailed Troubleshooting Method: List Below

    If troubleshooting procedures do not isolate the problem, ask for technical support from your National 4. Inform the operators of the necessity to refer to Hill-Rom representative: refer to the last page of this the user manual procedures of the Evolution manual.

  • Page 25: Function Checks

    The HS and KS rise simultaneously, then the KS stops at an angle approaching 16° while the Go to "Final Actions" page 2-4 HS continues to rise to its highest position. Evolution LI156Ex Bed Hill-Rom 2- 3 from Technical Manual...

  • Page 26: Final Actions

    Trendelenburg: teminals 4-5, HEAD SECTION MOTOR Rev. Trendelenburg assist: terminals 1-2 KNEE SECTION MOTOR 1512Atbl_200 B R O W N P IN K G R E Y W H IT E 1512_202.wmf 2- 4 Evolution LI156Ex Bed Hill-Rom from Technical Manual...

  • Page 27: 2.1 No Function Works

    ⇒ Repair the mains plug, and go to defective cable or switch and go ”Function Checks” page 2-3. to ”Function Checks" page 2-3. 9. Change the power cable. This solves the problem. ⇓ ⇒ Go to step 11. Evolution LI156Ex Bed Hill-Rom 2- 5 from Technical Manual...

  • Page 28: Bed Raise Function Not Working

    3. The problem is linked with the side-rail circuit. Follow RAP 2-14. ⇓ ⇒ Contact your National Hill-Rom 4. Lock-out switch test: Check for the proper representative, see the last page of this functioning and electrical continuity of the VH manual.
  • Page 29 "Function Checks" on page 2-3. 10. Pedal function test. If the bed has the VH pedal ⇓ ⇒ Contact your National Hill-Rom function, open the chassis junction box and representative, refer to the last page of disconnect the pedal connector.

  • Page 30: Bed Lower Function Not Working

    7, terminal 1 and terminal 8 printed circuit. If this solves the problem, (refer to Appendices 1 and 2, page 2-4) go to “Function Checks” page 2-3. Otherwise, go to step 11. 2- 8 Evolution LI156Ex Bed Hill-Rom from Technical Manual...

  • Page 31: Head Section Raise Function Not Working

    This solves the problem. ⇓ ⇒ Lower the Head Section completely in ⇓ ⇒ Contact your National Hill-Rom order to adjust the engagement cable. If this solves the problem, go to "Function representative, refer to the last page of Checks" on page 2-3. Otherwise, go to this manuel.

  • Page 32: Head Section Lower Function Not Working

    2-3. Otherwise, go to the next step. 5. T-cable test: Disconnect connector 1 from the ⇓ ⇒ Contact your National Hill-Rom power unit and use an ohm-meter to check the representative, refer to the last page of continuity between terminal 6 and the grey wire, this manual.

  • Page 33: Knee Section Raise Function Not Working

    (see Appendices 1 and 2 page 2-4). This solves the problem. There is continuity. ⇓ ⇒ Contact your National Hill-Rom ⇓ ⇒ Replace the T-cable and plug the bed representative, refer to the last page of back in. If this solves the problem, go to this manual.

  • Page 34: Knee Section Lower Function Not Working

    This solves the problem. Note: Refer to the abbreviations on page 1-3 of this manual. ⇓ ⇒ Contact your National Hill-Rom Note: Power unit connections: refer to appendix 2 representative, see the last page of this page 2-4. manual.

  • Page 35: The Autocontour Does Not Work

    This solves the problem. Note: Refer to the abbreviations on page 1-3 of this manual. ⇓ ⇒ Contact your National Hill-Rom Note: Power unit connections: refer to appendix 2 representative, refer to the last page of page 2-4. this manual.

  • Page 36: Abnormal Working Of The Bed When Running On The Battery (Option)

    If this solves the problem, perform the HE14 connector (refer to Appendices 1 and 2, ”Function Checks” on page 2-3. page 2-4). Otherwise contact your National Hill-Rom There is continuity. representative, refer to the last page of this manual. ⇓...

  • Page 37: Trendelenburg Does Not Function Correctly

    ⇒ Replace the cable by referring to This solves the problem. procedure 4.12 of Section 4. 6. Check that the Trendelenburg/Reverse ⇓ ⇒ Contact your National Hill-Rom Trendelenburg cable adjustment is correct by representative, refer to the last page of referring to procedure 4.12. this manual.

  • Page 38: Cpr Release Does Not Function Correctly

    5. Replace the HS motor by referring to This solves the problem. procedure 4-9. This solves the problem. ⇓ ⇒ Contact your National Hill-Rom representative, refer to the last page of ⇓ ⇒ Contact your National Hill-Rom this manual. representative, refer to the last page of 6.

  • Page 39: Troubleshooting For Side-Rails And Hand Pendant Control Unit

    ⇒ Go to step 3. 2. The problem does not come from the side-rail or 1512_203.wmf the hand pendant control unit. Contact your National Hill-Rom representative, refer to the last C om m on G reen V H R aise page of this manual.
  • Page 40 2-3. There is continuity. 12. The problem is not related to a side-rail. Contact your National Hill-ROM representative, refer to ⇓ ⇒ Replace the defective printed circuit and the last page of this manual. go to "Function Checks" on page 2-3.

  • Page 41: Troubleshooting For Variable Height Pedal

    8-pin round male Function Checks” on page 2-3. connector 4. The problem does not come from the pedals. VH Lower Contact your National Hill-ROM representative, VH Raise refer to the last page of this manual. Common 1512Atbl_205 There is continuity.

  • Page 42: B) Simplified General Troubleshooting Method For The Li156Ex

    K S m o to r to uchpa d s + ha nd p e nd ant co ntro l unit (op tio na l) 15 12 A tb l_20 6 2- 20 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 43 B AT T E R Y CB O 9 U N IT M O T O R P e rfo rm the ba ttery charge te st to co nfirm 1512_209.wmf Evolution LI156Ex Bed Hill-Rom 2- 21 from Technical Manual...
  • Page 44 * D isconnect the T-cable from input 1 * Fit a lock-out plug at input 1 F U N C TIO N S F U N C TIO N S CHANGE THE VH PEDAL Contact your CHANGE THE National Hill-Rom LOCK-OUT SW ITCH representative AND/OR T-CABLE...
  • Page 45 - LI156Ex ......3- 2 Schematic diagram for LI156Ex ....3- 3 3.1 Technical description ......3- 4 3.1.1 Mechanics .......... 3- 4 3.1.2 Electrics: Theory of Operation ..3- 4 Evolution LI156Ex Bed Hill-Rom 3- 1 from Technical Manual...

  • Page 46: General Cabling And Positioning Of Components - Li156Ex

    Theory of Operation A HILLENBRAND INDUSTRY Rev. 001 General cabling and positioning of components - LI156Ex 1512_300.tif 3- 2 Evolution LI156Ex Bed Hill-Rom from Technical Manual...

  • Page 47: Schematic Diagram For Li156Ex

    Theory of Operation A HILLENBRAND INDUSTRY Rev. 001 Schematic diagram for LI156Ex 1512_301.wmf Evolution LI156Ex Bed Hill-Rom 3- 3 from Technical Manual...

  • Page 48: 3.1 Technical Description

    Reverse autocontour. Trendelenburg control lever has been released, or These functions are performed by motors using very the maximum angle reached. low continuous security voltages. 3- 4 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 49 Section (external EOT fitted to the body of the motor) and Knee Section (EOT internal Intermittent 10% max. 10% max. 10% max. to the motor) motors. service 6 min 6 min 1 min hour 1512_tbl_303 Evolution LI156Ex Bed Hill-Rom 3- 5 from Technical Manual...
  • Page 50 22°, the intermediate EOT of the HS motor controls the KS motor as the section lowers. If the inclination of the HS is small to begin with, the KS will lower immediately. Note: Abbreviations: refer to Section 1. 3- 6 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 51 4.10) Knee Section motor replacement ..4- 17 4.18) Head and footboard replacement .. 4- 31 Removal ............. 4- 17 Removal ............. 4- 31 Installation ..........4- 18 Installation ..........4- 31 Evolution LI156Ex Bed Hill-Rom 4- 1 from Technical Manual...
  • Page 52 Removal of Variable Height pedal electric wiring ............. 4- 38 Installation of pedal electric wiring ..4- 39 4.26) Bedside Cabinet support rails replacement ........4- 40 Removal ............. 4- 40 Installation ..........4- 40 4- 2 Evolution LI156Ex Bed Hill-Rom from Technical Manual...

  • Page 53: Section 4: Removal

    3mm Allen key and remove the bar by lifting it the bed while keeping the intermediate up at the headend of the bed (C) connector attached to the cable. (see figure 2). Evolution LI156Ex Bed Hill-Rom 4- 3 from Technical Manual...

  • Page 54: Removal

    Phillips head screwdriver and open out the touchpad. Cut the cable wiring harness at the connector, and recover the touchpad unit. 10. Remove the adhesive waterproof sleeving from the connectors. 4- 4 Evolution LI156Ex Bed Hill-Rom from Technical Manual...

  • Page 55: Installation

    (see figure 3). Recover the washers. Replace the seven used caps. Hand Side-rails Perform the "Function Checks" on page 2-3 of pendant this manual. Power unit Motor EOT link Figure 3 1512A407.tif Evolution LI156Ex Bed Hill-Rom 4- 5 from Technical Manual...

  • Page 56: Removal

    Push the cables out from the junction box and remove the printed circuit. Unplug the connector of the cable to be replaced from the printed circuit: marking C4 (see figure 2). Figure 2 1512A406.tif 4- 6 Evolution LI156Ex Bed Hill-Rom from Technical Manual...

  • Page 57: Removal

    Do this by pushing in the pins above and below the power unit (see figure 2) and pull out the connector while tilting it in the opposite direction to the screwdriver. Evolution LI156Ex Bed Hill-Rom 4- 7 from Technical Manual...

  • Page 58: 4.5) Power Unit Replacement

    Unplug all the connectors B, C,1 and 2 of the this operation. Failure to do so could power unit (see figure 1). result in personal injury. Continue the standard procedure from step 3 (following page). 4- 8 Evolution LI156Ex Bed Hill-Rom from Technical Manual...

  • Page 59: Removal: General Procedure

    9. With the 3mm Allen key, remove the 2 screws fixing the power unit to the chassis while supporting it and then remove the unit from the bed. Recover the two screws and washers. Evolution LI156Ex Bed Hill-Rom 4- 9 from Technical Manual...

  • Page 60: Removal

    With the 3mm Allen key and the 8mm open end wrench, unscrew and remove the four screws securing the battery to its supports. 10. Remove the battery. Table 1 Perform the "Function Checks" on page 2-3 of this manual. 4- 10 Evolution LI156Ex Bed Hill-Rom from Technical Manual...

  • Page 61: Removal

    With the wire tie cutter, cut the wire ties securing the different cables to the chassis up to the power unit. Unplug connector 2 from the power unit (see figure 1) and separate the relevant cable. Evolution LI156Ex Bed Hill-Rom 4- 11 from Technical Manual...
  • Page 62 (B) and extract this assembly from the motor bedframe securely to the chassis to prevent (see figure 2). the bed from opening out when the Variable Height motor is removed (see figure 3). 4- 12 Evolution LI156Ex Bed Hill-Rom from Technical Manual...

  • Page 63: Removal: Specific Procedure When Bed Is

    B e dfram e w. Fully unscrew the nuts securing the motor S ling assembly (B) (see figure 2) and remove the assembly from the motor. C hassis Figure 5 1512_411.wmf Evolution LI156Ex Bed Hill-Rom 4- 13 from Technical Manual...

  • Page 64: Installation: For All Beds

    Failure to do so could result in personal injury. 14. With the 3mm Allen key, replace the Reverse Trendelenburg assist switch if it has been removed. Do not forget the metal spacers. 4- 14 Evolution LI156Ex Bed Hill-Rom from Technical Manual...

  • Page 65: 4.9) Head Section Motor Replacement

    9. Unplug connector 3 from the power unit the end of travel unit to the side-rail cables, (see figure 1). using the wire tie cutter (see figure 4). Evolution LI156Ex Bed Hill-Rom 4- 15 from Technical Manual...

  • Page 66: Installation

    If for any reason the Head Section cannot be adjusted to its high position, care must be taken when freeing the actuator because it is under constant pressure. Failure to do so could result in personal injury. 4- 16 Evolution LI156Ex Bed Hill-Rom from Technical Manual...

  • Page 67: Removal

    (C) securing the motor body (see figure 3). Unplug connector No. 4 of the power unit 18. Remove pin (C) while supporting the motor, (see figure 2). then remove the motor. Evolution LI156Ex Bed Hill-Rom 4- 17 from Technical Manual...

  • Page 68: Removal

    Make sure that the headend and footend cover slots are correctly positioned in the places provided on the chassis. 12. Perform the "Function Checks" on page 2-3 of this manual. 4- 18 Evolution LI156Ex Bed Hill-Rom from Technical Manual...

  • Page 69: Removal

    (A) screwed onto the adjusting device (B) on the Trend./Rev. Trend. lever support. Remove the sleeve (D) from the support (E) (see figure 1). Figure 1 1512A420.tif Evolution LI156Ex Bed Hill-Rom 4- 19 from Technical Manual...

  • Page 70: Installation

    Reverse Trendelenburg mechanism from beneath the mechanism. The cable must exit via one of the locking catches. If the position of the mechanism prevents this, press the release plate (G) (see 4- 20 Evolution LI156Ex Bed Hill-Rom from Technical Manual...

  • Page 71: Trendelenburg/Reverse Trendelenburg Mechnism Replacement

    T r e n d e l e n b u r g / R e v e r s e Trendelenburg mechanism is being repaired or serviced. Raise the side-rails. With the 17mm open end wrench, loosen the Nylstop locknut on the cable at the Trendelenburg/Reverse Trendelenburg control lever. Evolution LI156Ex Bed Hill-Rom 4- 21 from Technical Manual...
  • Page 72 (B) with the small flat blade screwdriver (see remove it from the housing. figure 1) without removing it and raise the gas spring rod by using the mallet handle. Figure 1 1512A424.tif 4- 22 Evolution LI156Ex Bed Hill-Rom from Technical Manual...

  • Page 73: Installation

    (see figure 3) via the opening (P) Figure 6 1512A428.tif (see figure 4). A piece of wood can be placed under the mechanism. Note: the end of the pin is slightly crushed using Evolution LI156Ex Bed Hill-Rom 4- 23 from Technical Manual...

  • Page 74: Removal

    (B) with the small flat blade screwdriver (see figure 1) without removing it and move apart the gas spring rod by using the mallet handle. 4- 24 Evolution LI156Ex Bed Hill-Rom from Technical Manual...

  • Page 75: Installation

    (see figure 3) without removing it and press the head of the gas spring rod and release the securing clip. Evolution LI156Ex Bed Hill-Rom 4- 25 from Technical Manual...

  • Page 76: Removal

    Figure 1 1512A430.tif 10. With the 3mm Allen key, slightly unscrew the two locking screws (B) of the cable sleeving at the disabling levers (see figure 2). 4- 26 Evolution LI156Ex Bed Hill-Rom from Technical Manual...

  • Page 77: Installation

    Replace the used plastic cable tie. Adjust the cable tension by following the instructions of the “Adjustment” section below, from step 3. 10. Perform the "Function Checks" on page 2-3 of this manual. Evolution LI156Ex Bed Hill-Rom 4- 27 from Technical Manual...

  • Page 78: Castor, Steer/Brake Castor Replacement

    "locked out" position (padlock closed). WARNING Technical staff may be injured if the bed is not disconnected from its power supply. 4- 28 Evolution LI156Ex Bed Hill-Rom from Technical Manual...

  • Page 79: Installation

    Position the castor to ensure that the rotation With the 5mm Allen key, unscrew the two of the hexagonal bar in the castor properly screws securing the castor. activates the neutral position. Evolution LI156Ex Bed Hill-Rom 4- 29 from Technical Manual...

  • Page 80: Adjustment Of Brake And Steer

    (viewed from above), until the brake begins to touch the wheels. Next, fit the castor covers. Figure 4 1512A436.tif 4- 30 Evolution LI156Ex Bed Hill-Rom from Technical Manual...

  • Page 81: Head And Footboard Replacement

    With the wire tie cutter, cut the plastic cable tie between the bedframe junction box and the side-rail, including those on the side-rail guide, while noting the position of the plastic conduit of the cable. Evolution LI156Ex Bed Hill-Rom 4- 31 from Technical Manual...

  • Page 82: Installation

    Note: if the side-rail or the connector(s) must be removed, refer to RAP 4.2 of this section. Perform the "Function Checks" on page 2-3 of this manual. 4- 32 Evolution LI156Ex Bed Hill-Rom from Technical Manual...

  • Page 83: Mechanical Leg Section Cable Replacement

    Recover the spacers. on the socket. 12. Remove the Leg Section mechanism from the Fit the Truarc circlips removed from the bed and continue the procedure on a previous pin. workbench. Evolution LI156Ex Bed Hill-Rom 4- 33 from Technical Manual...

  • Page 84: Adjustment

    Remove the side-rail cable and sleeving assembly. 10. Remove one of the Truarc circlips of the pin from the end of the Leg Section mechanism rod and remove the pin. Recover the spacers. 4- 34 Evolution LI156Ex Bed Hill-Rom from Technical Manual...

  • Page 85: Installation

    (see figure 1 of the removal procedure) and slacken the sleeving. Pull the sleeving/cable assembly from the Leg Section sleeving until the Leg Section control levers touch their support. Evolution LI156Ex Bed Hill-Rom 4- 35 from Technical Manual...

  • Page 86: 4.24) Extension Replacement

    With the 5mm Allen key, unscrew and remove the 4 screws (A) securing the extension (see figure 1). Note: the screws are mounted with a medium locking compound. 4- 36 Evolution LI156Ex Bed Hill-Rom from Technical Manual...

  • Page 87: Installation

    (A) (Trendelenburg/Reverse Trendelenburg cable at the footend of the chassis (see figure 1). replacement). Perform the "Function Checks" on page 2-3 of this manual. Figure 1 1512A418.tif Evolution LI156Ex Bed Hill-Rom 4- 37 from Technical Manual...

  • Page 88: Removal Of Variable Height Pedal Electric Wiring

    (A) securing the righthand pedal and place it on the footend cover after moving it between the longitudinal tube of the chassis and the Trend./Rev. Trend. mechanism. Recover the washers (B) (see figure 6). 4- 38 Evolution LI156Ex Bed Hill-Rom from Technical Manual...

  • Page 89: Installation Of Pedal Electric Wiring

    Remove the pins (K) securing the switches (L) to the socket (see figure 6). 10. Note down the position of the wiring (see figure 7), then remove it from its housing. Evolution LI156Ex Bed Hill-Rom 4- 39 from Technical Manual...

  • Page 90: Bedside Cabinet Support Rails Replacement

    6 screws (A) securing the rails (B) (see figure 1) Figure 1 1512A449.tif Installation Perform the removal procedure in reverse order. Perform the "Function Checks" on page 2-3 of this manual. 4- 40 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 91 5.26 Footend Side-rails after 28/02/01 ..5- 54 5.27 Hand Pendant Control Unit Connection ........5- 56 5.28 Hard Surfaces ........5- 58 5.29 Earthing ..........5- 60 5.30 Head and Footboards ..... 5- 62 Evolution LI156Ex Bed Hill-Rom 5- 1 from Technical Manual...

  • Page 92: Ordering Service Parts

    Use the parts list in this manual to identify the part numbers you require. Call the after sales service of your national Hill-Rom representative (refer to the last page of this manual). To help expedite the processing of your parts order,...

  • Page 93: Exchange Policy

    3 years: Out-of-warranty exchanges Description In-warranty exchanges I/O touchpad for righthand side-rail Hill-Rom will request that certain defective parts be systematically returned for assessment. I/O touchpad for lefthand side-rail In certain cases, the invoice sent with the parts will Power Unit show the full selling price of the parts.

  • Page 94: Castors

    CAST. 2046 UAP 150 R26-289 LN48 RO0098 CAST. 2044 UAP 150 R26-285 LN48 (STEER) RO0100 CAST. 2046 XSP 150 R26-285 LN48 Note: Castors 2 and 5 are reversed for the footend steering castor option. 1512Atbl_501 5- 4 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 95 Parts List A HILLENBRAND INDUSTRY Rev. 001 1512_501.tif Evolution LI156Ex Bed Hill-Rom 5- 5 from Technical Manual...

  • Page 96: Single Brake

    SINGLE BRAKE HEXAGON BAR VI0488 TRIGOB SCREW FZ M4x10 Z.B LT0963 MB SINGLE BRAKE PEDAL QD1122 SKIFFY PLUG VI0040 CHC SCREW M6 x 40 ZB VI0159 NYLSTOP LOCKNUT HM6 ZB 1512Atbl_502 5- 6 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 97 Parts List A HILLENBRAND INDUSTRY Rev. 001 1512_502.tif Evolution LI156Ex Bed Hill-Rom 5- 7 from Technical Manual...

  • Page 98: Power Supply

    VI0464 BHC SCREW M5x16 Z.B VI0370 NYLSTOP LOCKNUT SB M5 Z.B VI0514 METAL SCREW NO.14x19 Z.B F10103 BATTERY SUPPORT Page 1-13 BATTERY LABEL 156 Page 1-13 BATTERY LABEL 156 FRENCH 1512Atbl_503 5- 8 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 99 Parts List A HILLENBRAND INDUSTRY Rev. 001 1512A503.tif Evolution LI156Ex Bed Hill-Rom 5- 9 from Technical Manual...

  • Page 100: Variable Height Power

    S10667 TR/REV TR FOOT PIN MOTOR SPIGOT VE0117 VH MOTOR S20905 VH MOTOR REINFORCEMENT WIRE S20906 VH MOTOR REINFORCEMENT VI0367 NYLSTOP LOCKNUT M8 S.B. Z.B. VI0372 CONTACT WASHER 8*18 ZB 1512Atbl_504 5- 10 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 101 Parts List A HILLENBRAND INDUSTRY Rev. 001 1512_504.tif Evolution LI156Ex Bed Hill-Rom 5- 11 from Technical Manual...

  • Page 102: Simple Variable Height: Connector

    QD0526 TRUARC CIRCLIPS 10 SPRINGFIX S10480 TR/REV TR PLASTIC BUSH VE0021 LOM GAS SPRING 09465FI10200 F:115KG VI0361 HEX. NUT M8 Z.B. VI0372 CONTACT WASHER 8*18 Z.B. LT1379 TRENDELENBURG SHUNT CONNECTOR 1512_tbl_505 5- 12 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 103 Parts List A HILLENBRAND INDUSTRY Rev. 001 1512_505.tif Evolution LI156Ex Bed Hill-Rom 5- 13 from Technical Manual...

  • Page 104: Variable Height: Trendelenburg/Reverse Trendelenburg Mechanism

    TRUARC CIRCLIPS 12 SPRINGFIX S10480 TR/REV TR PLASTIC BUSH S10822 MOTOR HEAD BUSH S10737 TR/REV TR FOOT PIN MOTOR SPIGOT S10668 TR/REV TR HEAD PIN VI0361 HEX. NUT M8 Z.B 1512_tbl_506 5- 14 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 105 Parts List A HILLENBRAND INDUSTRY Rev. 001 1512_506.tif Evolution LI156Ex Bed Hill-Rom 5- 15 from Technical Manual...

  • Page 106: Variable Height Pedal

    T45 PLASTIC SCREW CBL 4*10 Z.B. VI0446 BHC SCREW M8*20 Z.B. VI0372 CONTACT WASHER 8*18 Z.B. F1Z012 CABLE TRACK TYPE LD3WH2M-A L=150mm QD0404 STRAP 186 - 210 LTZ202 CABLE + CONNECTOR + SLEEVES 1512Atbl_507 5- 16 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 107 Parts List A HILLENBRAND INDUSTRY Rev. 001 1512_507.tif Evolution LI156Ex Bed Hill-Rom 5- 17 from Technical Manual...

  • Page 108: End Of Travel Switch Assembly

    Parts List A HILLENBRAND INDUSTRY Rev. 001 End of Travel Switch Assembly Reference Description LTZ204 END OF TRAVEL ASSEMBLY S10793 SPACER DIA.:4.2x16.5x20 (F/C) VI0334 CHC SCREW M4*25 8/8 Z.B 1512Atbl_508 5- 18 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 109 Parts List A HILLENBRAND INDUSTRY Rev. 001 1512_508.tif Evolution LI156Ex Bed Hill-Rom 5- 19 from Technical Manual...

  • Page 110: Chassis Covers

    BHC SCREW M5 x 10 ZB VI0458 CHC SCREW 4x35 Z.B S10704 HEAD SECTION RELEASE PLASTIC SPACER Page 5-65 or LOCK-OUT LABEL 5-67 LTZ206 T-CABLE + CONNECTOR QD0562 LOCKOUT SWITCH. 2P K10000004 1512Atbl_509 5- 20 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 111 Parts List A HILLENBRAND INDUSTRY Rev. 001 1512_509.tif Evolution LI156Ex Bed Hill-Rom 5- 21 from Technical Manual...

  • Page 112: Lift Arm

    SPLIT PIN 3.5x18 BED WITH TRENDELENBURG/REVERSE TRENDELENBURG OPTION S30436 LIFT ARM BUSH + MARKING S30429 LIFT ARM BUSH BED WITHOUT TRENDELENBURG/REVERSE TRENDELENBURG OPTION S30429 LIFT ARM BUSH S30429 LIFT ARM BUSH 1512Atbl_510 5- 22 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 113 Parts List A HILLENBRAND INDUSTRY Rev. 001 1512_510.tif Evolution LI156Ex Bed Hill-Rom 5- 23 from Technical Manual...

  • Page 114: Lift Arm: Conduit

    Parts List A HILLENBRAND INDUSTRY Rev. 001 5.11 Lift arm: conduit Reference Description QD0577B CONDUIT L=650mm S30360 CONDUIT STRAP VI0464 BHC SCREW M5x16 Z.B 1512Atbl_511 5- 24 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 115 Parts List A HILLENBRAND INDUSTRY Rev. 001 1512_511.tif Evolution LI156Ex Bed Hill-Rom 5- 25 from Technical Manual...

  • Page 116: Intermediate Section

    PLASTIC BUSH. DIA./7.8*22 L=26 01126611 SIDE-RAIL SOCKET Page 5-60 BUSH FR-POAG-S 4B1.071.01 Page 5-60 EQUIPOTENTIAL TERMINAL 01114611 BEDSIDE CABINET TRANSPORT MECHANISM VI0344 BHC SCREW M6*10 Z.B. 00611111 ADHESIVE EDGING 16*3.5*35 1512Atbl_512 5- 26 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 117 Parts List A HILLENBRAND INDUSTRY Rev. 001 Symmetrical Headboard intermediate section Horizontal Symmetrical Headboard intermediate section 1512_512.tif Evolution LI156Ex Bed Hill-Rom 5- 27 from Technical Manual...

  • Page 118: Head Section Articulation And Release Lever

    LT1303 MB HEAD SECTION LT0811 MB HEAD SECTION ARTICULATION CONNECTING ROD S10499 HS/LS LEVER BUSH S30282 RELEASE LEVER VI0208 HC SCREW M6x6 NOTCHED CURVED Z.B VI0344 BHC SCREW M6x10 Z.B 1512Atbl_513 5- 28 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 119 Parts List A HILLENBRAND INDUSTRY Rev. 001 1512_513.tif Evolution LI156Ex Bed Hill-Rom 5- 29 from Technical Manual...

  • Page 120: Knee Section

    KNEE SECTION ARTICULATION SCREW S10809 PLASTIC BUSH DIA.: 7.8x22 L=26 S30258 LEFTHAND HS/LS WHEEL S30262 RIGHTHAND HS/LS WHEEL VI0516 BHC M8x16 10/9 LOCKSCREW Z.B LT1302 MB KNEE FRAME LT0778 MB LEG SECTION 1512Atbl_514 5- 30 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 121 Parts List A HILLENBRAND INDUSTRY Rev. 001 1512_514.tif Evolution LI156Ex Bed Hill-Rom 5- 31 from Technical Manual...

  • Page 122: Knee Section Motor And Bedframe Junction Box

    TR/REV TR FOOT PIN MOTOR SPIGOT VE0119 KNEE SECTION MOTOR S30454 JUNCTION BOX VI0464 BHC SCREW M5*16 Z.B. VI0390 WASHER 5*12 Z.B. QD1583 PRINTED CIRCUIT LTZ208 BEDFRAME JUNCTION BOX CB09 CONENCTION cable 1512Atbl_515 5- 32 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 123 Parts List A HILLENBRAND INDUSTRY Rev. 001 1512_515.tif Evolution LI156Ex Bed Hill-Rom 5- 33 from Technical Manual...

  • Page 124: Head Section Power And Assist

    S10737 PIN DIA.:12 L=79 USEFUL LENGTH LTZ209 HEAD SECTION MOTOR ASSEMBLY VI0491 PLASTIC WASHER 12.2*24*1 NYLON QD0055 SES STRAP 85/24 SL-M VE0088 LIFT-O-MAT GAS SPRING F=450N LT0475 GAS SPRING PLATE 1512_tbl_516 5- 34 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 125 Parts List A HILLENBRAND INDUSTRY Rev. 001 1512_516.tif Evolution LI156Ex Bed Hill-Rom 5- 35 from Technical Manual...

  • Page 126: Cpr - Head Section Release

    SES STRAP 380/47 SL HT-C WHITE QD0820 HEAD SECTION CABLE AND SLEEVING ASSEMBLY QD0822 OPERATION CLEVIS "B" 5x20 S20677 HEAD SECTION BRACKET S20678 DRAWBAR VI0390 WASHER DIA.: 5x12 Z.B VI0464 BHC SCREW DIA.: 5x16 Z.B 1512Atbl_517 5- 36 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 127 Parts List A HILLENBRAND INDUSTRY Rev. 001 1512_517.tif Evolution LI156Ex Bed Hill-Rom 5- 37 from Technical Manual...

  • Page 128: Leg Section Mechanism

    S20635 TRACTION SPRING S20654 KNEE SECTION CATCH S20711 LEG SECTION SLIDE BAR S30373 LEG SECTION BASE VI0419 BHC SCREW M6x16 Z.B LTZ222 MB LEG SECTION SLEEVE F10510 SLEEVING STOP FLAT 1512Atbl_518 5- 38 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 129 Parts List A HILLENBRAND INDUSTRY Rev. 001 1512_518.tif Evolution LI156Ex Bed Hill-Rom 5- 39 from Technical Manual...

  • Page 130: Trendelenburg/Reverse Trendelenburg Lever

    BHC SCREW M8x2 Z.B VI0384 PLASTIC SCREW T45 CBL 4 x 12 ZB VI0453 BHC SCREW M5x10 Z.B LT0786 MB TR/REV TR ASSIST LEVER LT0757 MB TR/REV TR RELEASE LEVER 1512Atbl_519 5- 40 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 131 Parts List A HILLENBRAND INDUSTRY Rev. 001 1512_519.tif Evolution LI156Ex Bed Hill-Rom 5- 41 from Technical Manual...

  • Page 132: Ends Of The Bed

    VI0416 POZIDRIVE COUNTERSUNK HEAD SCREW NO.10x+F30913 QD1047 INSERT M8 PLUGGING COLLAR QD0409 NYLON SPACER 1025P2800 S10802 ENDBOARD SUPPORT SCREW S20726 LEFTHAND ENDBOARD SUPPORT S20725 RIGHTHAND ENDBOARD SUPPORT S30233 ELASTIC STOP 1512Atbl_520 5- 42 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 133 Parts List A HILLENBRAND INDUSTRY Rev. 001 1512_520.tif Evolution LI156Ex Bed Hill-Rom 5- 43 from Technical Manual...

  • Page 134: Fixed And Sliding Extensions

    VI0402 PLASGOB SCREW 5x12 Z.B VI0446 BHC SCREW M8x20 Z.B SLIDING EXTENSION VI0402 PLASGOB SCREW 5x12 Z.B VI0446 BHC SCREW M8x20 Z.B S20560 EXTENSION LEVER S30314 EXTENSION LEVER BEARING ASSEMBLY 1512Atbl_521 5- 44 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 135 Parts List A HILLENBRAND INDUSTRY Rev. 001 Fixed extension Sliding extension 1512_521.tif Evolution LI156Ex Bed Hill-Rom 5- 45 from Technical Manual...

  • Page 136: Side-Rail Fastenings

    Rev. 001 5.22 Side-rail Fastenings Reference Description VI0327 HEX. SCREW M8x20 Z.B VI0376 LOCKWASHER 8x14 Z.B LT0800 MB SIDE-RAIL SLIDE + PLATE QD0808 SES STRAP 380/47 QD0637 SPACER DIA.12.8x DIA.18 L7.5 1512Atbl_522 5- 46 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 137 Parts List A HILLENBRAND INDUSTRY Rev. 001 1512_522.tif Evolution LI156Ex Bed Hill-Rom 5- 47 from Technical Manual...

  • Page 138: Headend Side-Rails Up

    RIGHTHAND SIDE-RAIL CONTROL KIT 156 LTZ215 LEFTHAND SIDE-RAIL CONTROL KIT 156 LTZ216 SIDE-RAIL CABLE KIT BAZ017 RIGHTHAND HEADEND FULL SIDE-RAIL 156D/E WITH CATCH BAZ016 LEFTHAND HEADEND FULL SIDE-RAIL 156D/E WITH CATCH 1512Atbl_523 5- 48 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 139 Parts List A HILLENBRAND INDUSTRY Rev. 001 1512_523.tif Evolution LI156Ex Bed Hill-Rom 5- 49 from Technical Manual...

  • Page 140: Headend Side-Rails After

    See Page 5-48 LEFTHAND SIDE-RAIL CONTROL KIT 156 See Page 5-48 SIDE-RAIL CABLE KIT BAZ040 RIGHTHAND HEADEND FULL SIDE-RAIL 156D/E WITH CATCH BAZ041 LEFTHAND HEADEND FULL SIDE-RAIL 156D/E WITH CATCH 1512Atbl_531 5- 50 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 141 Parts List A HILLENBRAND INDUSTRY Rev. 001 1512A531.tif Evolution LI156Ex Bed Hill-Rom 5- 51 from Technical Manual...

  • Page 142: Footend Side-Rails Up To 28/02/01

    FOOT SIDE-RAIL LOWER SECTION (without bar) BAZ034 RIGHTHAND FOOTEND SIDE-RAIL LOWER SECTION BAZ035 LEFTHAND FOOTEND SIDE-RAIL LOWER SECTION BAZ019 RIGHTHAND FOOTEND FULL SIDE-RAIL 156D/E WITH CATCH BAZ018 LEFTHAND FOOTEND FULL SIDE-RAIL 156D/E WITH CATCH 1512Atbl_524 5- 52 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 143 Parts List A HILLENBRAND INDUSTRY Rev. 001 1512_524.tif Evolution LI156Ex Bed Hill-Rom 5- 53 from Technical Manual...

  • Page 144: Footend Side-Rails After 28/02/01

    See Page 5-52 FOOTEND SIDE-RAIL LONG BAR KIT 156 See Page 5-52 SIDE-RAIL SHORT BAR KIT 156 BAZ042 RIGHTHAND FOOTEND FULL SIDE-RAIL 156D/E WITH CATCH BAZ043 LEFTHAND FOOTEND FULL SIDE-RAIL 156D/E WITH CATCH 1512Atbl_532 5- 54 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 145 Parts List A HILLENBRAND INDUSTRY Rev. 001 1512A532.tif Evolution LI156Ex Bed Hill-Rom 5- 55 from Technical Manual...

  • Page 146: Hand Pendant Control Unit Connection

    WASHER 3*8 Z.B. F11168 NYLON WIRE 100/10 L:280 S10638 LINEN HOLDER CABLE GLAND QD0891 O-RING S10880 PLUG LTZ220 HAND PENDANT CONTROL UNIT CONNECTION CABLE KIT QD1261 EVOLUTION CONTROL UNIT (AD091A) 1512Atbl_525 5- 56 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 147 Parts List A HILLENBRAND INDUSTRY Rev. 001 1512_525.tif Evolution LI156Ex Bed Hill-Rom 5- 57 from Technical Manual...

  • Page 148: Hard Surfaces

    HEAD SECTION LAMINATED HARD SURFACE S30281 LAMINATED HARD SURFACE FASTENING CLIP VI0347 SCREW FHC/90 M6x12 Z.B F10878 CENTRAL SECTION LAMINATED HARD SURFACE F10880 KNEE SECTION LAMINATED HARD SURFACE F10881 LEG SECTION LAMINATED HARD SURFACE 1512Atbl_526 5- 58 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 149 Parts List A HILLENBRAND INDUSTRY Rev. 001 1512_526.tif Evolution LI156Ex Bed Hill-Rom 5- 59 from Technical Manual...

  • Page 150: Earthing

    EARTH WIRE CHA-SOM HR3924010 QD0761 EQUIPOTENTIAL WIRE L=155 VI0241 SPRING WASHER D5 Z.B VI0453 BHC SCREW M5*10 Z.B VI0478 TRILOB SCREW CB D4*8 Z.B QD0760 EQUIPOTENTIAL WIRE L=420 QD0404 STRAP 186 - 210 1512Atbl_527 5- 60 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 151 Parts List A HILLENBRAND INDUSTRY Rev. 001 1512A527.tif Evolution LI156Ex Bed Hill-Rom 5- 61 from Technical Manual...

  • Page 152: 5.30 Head And Footboards

    HEADBOARD OR FOOTBOARD OF THE BED DL136P LINEN HOLDER FOOTBOARD LAMINATED ENDBOARD + DOUBLE-SIDE (INDICATE COLOUR LTZ050 + CODE) QD0701 LGC PIN D: 6*18 STAINLESS STEEL LTZ863 ENDBOARD LOCKING MECHANISM 1512Atbl_528 5- 62 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 153 Parts List A HILLENBRAND INDUSTRY Rev. 001 1512A528.tif Evolution LI156Ex Bed Hill-Rom 5- 63 from Technical Manual...

  • Page 154: Labels For Symmetrical Headboard 156Ex Bed

    QD1218 COMMERCIAL LABEL Page 1-13 30 mA LABEL Page 1-13 IDENTIFICATION LABEL Page 1-13 BARCODE LABEL Page 1-13 BATTERY LABEL Page 1-13 ANTISTATIC CASTOR LABEL Page 1-13 SIDE-RAIL LOCK-OUT LABEL 1512Atbl_529 5- 64 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 155 Parts List A HILLENBRAND INDUSTRY Rev. 001 1512_529.tif Evolution LI156Ex Bed Hill-Rom 5- 65 from Technical Manual...

  • Page 156: Labels For Horizontal Symmetrical Headboard 156Ex Bed

    Page 5-60 COMMERCIAL LABEL Page 1-13 30 mA LABEL Page 1-13 IDENTIFICATION LABEL Page 1-13 BARCODE LABEL Page 1-13 BATTERY LABEL Page 1-13 ANTISTATIC CASTOR LABEL Page 1-13 SIDE-RAIL LOCK-OUT LABEL 1512Atbl_530 5- 66 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 157 Parts List A HILLENBRAND INDUSTRY Rev. 001 1512A530.tif Evolution LI156Ex Bed Hill-Rom 5- 67 from Technical Manual...
  • Page 158 Parts List A HILLENBRAND INDUSTRY Rev. 001 Notes 5- 68 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 159 Lubrication Requirements ......6- 2 Storing the Bed ..........6- 2 Preventive Maintenance ....... 6- 2 Preventive Maintenance Schedule ..6- 3 Preventive Maintenance Checklist ..6- 5 Tools and Specific Requirements ....6- 6 Evolution LI156Ex Bed Hill-Rom 6- 1 from Technical Manual...

  • Page 160: Cleaning And Care

    After prolonged storage, it is also advisable to plug the bed into the mains supply for 12 hours to fully recharge the battery before using the bed. 6- 2 Evolution LI156Ex Bed Hill-Rom from Technical Manual...

  • Page 161: Preventive Maintenance Schedule

    Lower" control is activated and that the HS reaches an angle of 22°. Replace the defective motor if necessary. Lockout switches T est the switches separately in order to check that they operate correctly. Replace if necessary. 1512Atbl_600 Table 6-1. Preventive Maintenance Schedule Evolution LI156Ex Bed Hill-Rom 6- 3 from Technical Manual...
  • Page 162 Check the attachment of the rails on the SH frame. Replace any defective or missing screws. Administrative Carry out all the necessary administrative procedures. procedures 1512Atbl_601 Table 6-1. Preventive Maintenance Schedule (continued) 6- 4 Evolution LI156Ex Bed Hill-Rom from Technical Manual...

  • Page 163: Preventive Maintenance Checklist

    A d m in istra tive p ro ce d u re s L a bo u r: R e p a ir co st: In sp e cte d b y: 1512_600.wmf Evolution LI156Ex Bed Hill-Rom 6- 5 from Technical Manual...

  • Page 164: Tools And Specific Requirements

    Notes Tools and Specific Requirements The Evolution bed requires no special tools or requirements, apart from a torque wrench and pliers that are used to assemble the side-rail cables (ref: OUZ001). 6- 6 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 165 ST856A, AC930A, AC903A (SH bed only) ........... 7- 4 7.2.18 AD090A assembly and cabling kit for hand-held control unit: AD091A ..........7- 4 7.2.19 Variable Height pedal kit: AD098A ..........7- 6 Evolution LI156Ex Bed Hill-Rom 7- 1 from Technical Manual...
  • Page 166 AD098A Electrical Variable Height pedal kit AD090A Hand pendant control unit assembly kit AD091A Hand pendant control unit ST856A Kinétec Head Section frame - crossbeam PR03 - ST860A Kinétec frame 1512Atbl_700 7- 2 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 167 The label holder identifies the patient on the bed. It is of the way up, while holding on to the pole. positioned by clipping it onto the upper rounded part of the footboard. Evolution LI156Ex Bed Hill-Rom 7- 3 from Technical Manual...
  • Page 168 Put the side-rail (right hand side of the patient) the clamp provided, and the vertical bar must in the low position. Remove the hard surfaces from the Head and central sections of the bedframe (see figure 1). 7- 4 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 169 (B) holding the junction box under the central connection kit). crossbeam of the base (see figure 6). Pull the cable out of the notches of the junction box and remove the printed circuit (see figure 5). Evolution LI156Ex Bed Hill-Rom 7- 5 from Technical Manual...
  • Page 170 Put the side-rails in the intermediate position. With the 3mm Allen key, unscrew the four screws securing the headend and footend covers of the bed. Recover the washers. 7- 6 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 171 “locked out” position (padlock closed). WARNING Electric current flows through the connections when the bed is plugged in. Technical personnel may be injured if the bed is not unplugged from its power source. Evolution LI156Ex Bed Hill-Rom 7- 7 from Technical Manual...
  • Page 172 Test the operation of the raise and lower functions on both pedals. In case of malfunction, check RAP 2.15, section 2 of this manual or contact your national Hill Rom representative (refer to last page of this manual). 7- 8 Evolution LI156Ex Bed Hill-Rom from Technical Manual...
  • Page 174 Service Clients : +33 (0) 802 01 23 45 Fax : +32 32 16 06 86 Fax : +41 (0)21 / 706 21 33 Fax : +33 (0) 2 97 50 92 00 e-mail : hrch.info@hill-rom United Kingdom Deutschland Österreich...

Table of Contents