Liko™ ComfortVest™ Mod. 95
Instructions for Use
The ComfortVest is designed to support behind the patient's
back and outside of the arms. The inner surface of the vest
is covered with material which helps prevent the vest from
sliding up on the body.
The Liko ComfortVest is available in different sizes.
In this document, the person being lifted is referred to as the patient, and the person helping is referred to as the caregiver.
IMPORTANT!
Lifting and transferring a patient always involves a certain level of risk. Read the instructions for use for both the patient
lift and lifting accessories before use. It is important to completely understand the contents of the instructions for use.
The equipment should only be used by trained personnel. Ensure that the lifting accessories are suitable for the lift used.
Exercise care and caution during use. As a caregiver, you are always responsible for the patient's safety. You must be aware
of the patient's ability to make it through the lifting situation. If something is unclear, contact the manufacturer or supplier. .
7EN160144 Rev. 5
ENGLISH 2020
Product Description
A waist belt is sewn to the vest to help keep the vest in
place. This safety feature also helps avoid the risk of a
patient sliding out of the sit-to-stand vest. You must use
a combination of two loops on each hook when attaching
the vest to the lift.
The ComfortVest should be used with the Sabina™ sit-to-
stand lift with Comfort SlingBar (600 mm / 23.6 inch. wide).
Need help?
Do you have a question about the Liko ComfortVest 95 and is the answer not in the manual?
Questions and answers