EN
IMPORTANT: the camera automatically sets the date and time by default by retrieving this
information from the Internet each time it is powered on. If the camera is restarted, the correct date
and time cannot be guaranteed if the camera does not access the Internet. If the date and time are
not set correctly, the SD memory recordings may be compromised.
4 How to configure the camera in a Wi-Fi network
The first time the camera is switched on, it is placed in Access Point (AP) mode, and to connect it to a
Wi-Fi network, it is necessary to download the URMET V-Stream App to your mobile phone and refer
to the quick setup guide.
9