ST STEVAL-IFP047V1 User Manual
ST STEVAL-IFP047V1 User Manual

ST STEVAL-IFP047V1 User Manual

Industrial digital output expansion board based on iso808-1 in tfqfpn32 package

Advertisement

Quick Links

Industrial digital output expansion board based on ISO808-1 in TFQFPN32
Introduction
The
STEVAL-IFP047V1
is an industrial digital output expansion board based on
It provides a powerful and flexible environment for the evaluation of the driving and diagnostic capabilities of the
high-side smart power solid state relay, with embedded galvanic isolation, in a digital output module connected to 1.0 A
industrial loads.
The
STEVAL-IFP047V1
directly interfaces with the microcontroller on the
connectors, ensuring connectivity with either a
The galvanic isolation between the microcontroller and the process stage is guaranteed by the ISO808-1.
It is also possible to evaluate a system composed of a
UM3137 - Rev 1 - October 2023
For further information contact your local STMicroelectronics sales office.
NUCLEO-F401RE
or a
STEVAL-IFP047V1
Figure 1.
STEVAL-IFP047V1 expansion board
ISO808-1
and compatible with
STM32 Nucleo
driven by GPIO pins and Arduino® R3
NUCLEO-G431RB
development board.
stacked on other expansion boards.
UM3137
User manual
package
STM32
Nucleo.
ISO808-1
octal
www.st.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the STEVAL-IFP047V1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ST STEVAL-IFP047V1

  • Page 1: Figure 1. Steval-Ifp047V1 Expansion Board

    The galvanic isolation between the microcontroller and the process stage is guaranteed by the ISO808-1. It is also possible to evaluate a system composed of a STEVAL-IFP047V1 stacked on other expansion boards. Figure 1. STEVAL-IFP047V1 expansion board UM3137 - Rev 1 - October 2023 www.st.com For further information contact your local STMicroelectronics sales office.
  • Page 2: Getting Started

    UM3137 Getting started Getting started Overview STEVAL-IFP047V1 embeds the ISO808-1 intelligent power switch (IPS), which features galvanic isolation, overcurrent and overtemperature protection for safe output loads control. The board is designed to meet the application requirements for the galvanic isolation between the user and power interfaces.
  • Page 3: Digital Section

    The pin 3 of the connector CN11 can be used to supply the logic side of the ISO808-1 independently by the expansion board. In this case, on the STEVAL-IFP047V1, the pins 1 and 2 of J4 must be closed (pins 5-6 open). UM3137 - Rev 1 page 3/19...
  • Page 4: Power Section

    (eight loads can be connected between each pin of CN2, CN3, CN4, and CN12 and pin 2 of CN1), EMC protections (U2), and supply reverse polarity protection (D1). Figure 3. STEVAL-IFP047V1 expansion board: power section ISO808-1 Output and power supply connector...
  • Page 5: Hardware Requirements

    Arduino UNO R3 connector pins on the STM32 Nucleo board as shown below. Figure 4. STEVAL-IFP047V1 and STM32 Nucleo stack System requirements To use the STM32 Nucleo development boards with the STEVAL-IFP047V1 expansion board, you need: •...
  • Page 6: Board Setup

    STM32 ST-LINK utility, STM32CubeProgrammer, and according with information detailed in the table below. The STEVAL-IFP047V1 can be used to control the ISO808-1 device in two different modes: Direct Control Mode (DCM) and Synchronous Control Mode (SCM). The binary files provided...
  • Page 7: Schematic Diagrams

    691214110002 OUT7 OUT8 SSQ-119-04-L-D SSQ-119-04-L-D (Not mounted) CN12 EXT_Vdd ISO808QTR-1 direct supply voltage: - set to max 3.3 V when STEVAL-IFP047V1 is used with NUCLEO board DEFAULT STATUS R108 ESDA7P60-1U1M I OREF Alternate use STATUS R107 100 N.M. - can be set to max 5.5 V N.M.
  • Page 8: Figure 6. Steval-Ifp047V1 Circuit Schematic (2 Of 2)

    Figure 6. STEVAL-IFP047V1 circuit schematic (2 of 2) default: close 1-2, 5-6 con6-2x3-strip-male default: close 5-6 EXT_Vdd 0.1uF OUT1 10nF RED LED 2.2uF SMBJ5.0A-TR con6-2x3-strip-male 0.1uF LED YELLOW 10nF OUT_EN OUT2 OUT_EN OUT2 10nF SYNCH SYNC OUT2 LOAD OUT3 LOAD...
  • Page 9: Bill Of Materials

    UM3137 Bill of materials Bill of materials Table 2. STEVAL-IFP047V1 bill of materials Item Q.ty Ref. Part/value Description Manufacturer Order code 10nF 0603 CAP CER C1 C2 C3 C4 Wurth (1608 Metric) 10000PF 50V 885382206002 C5 C6 C7 C8 Electronics Inc.
  • Page 10 UM3137 Bill of materials Item Q.ty Ref. Part/value Description Manufacturer Order code LED GREEN LED GREEN D3 D4 D5 D6 Wurth 0603 (1608 CLEAR 0603 150060VS75000 D7 D8 D9 D10 Electronics Inc. Metric) 20mA RED LED 0603 LED RED Wurth (1608 Metric) CLEAR 0603 150060RS75000...
  • Page 11 UM3137 Bill of materials Item Q.ty Ref. Part/value Description Manufacturer Order code R101 R102 R108 R109 100 0603 (1608 RES SMD 100 R110 R111 Metric) 0.1W, OHM 1% 1/10W Yageo RC0603FR-07100RP R112 R113 1/10W 1% 0603 R114 R116 R118 R119 R103 R104 100 0603 (1608 RES SMD 100...
  • Page 12: Board Versions

    UM3137 Board versions Board versions Table 3. STEVAL-IFP047V1 versions Finished good Schematic diagrams Bill of materials STEVAL$IFP047V1A STEVAL$IFP047V1A schematic diagrams STEVAL$IFP047V1A bill of materials 1. This code identifies the STEVAL-IFP047V1 evaluation board first version. UM3137 - Rev 1 page 12/19...
  • Page 13: Regulatory Compliance Information

    UM3137 Regulatory compliance information Regulatory compliance information Notice for US Federal Communication Commission (FCC) For evaluation only; not FCC approved for resale FCC NOTICE - This kit is designed to allow: (1) Product developers to evaluate electronic components, circuitry, or software associated with the kit to determine whether to incorporate such items in a finished product and (2) Software developers to write software applications for use with the end product.
  • Page 14: References

    UM3137 References References Freely available on www.st.com: • ISO808-1 datasheet • UM3035: "Getting started with X-CUBE-IPS industrial digital output software for STM32 Nucleo" • NUCLEO-F401RE documentation • NUCLEO-G431RB documentation UM3137 - Rev 1 page 14/19...
  • Page 15: Revision History

    UM3137 Revision history Table 4. Document revision history Date Revision Changes 02-Oct-2023 Initial release. UM3137 - Rev 1 page 15/19...
  • Page 16: Table Of Contents

    UM3137 Contents Contents Getting started ..............2 Overview .
  • Page 17: List Of Tables

    STEVAL-IFP047V1 bill of materials ........
  • Page 18: List Of Figures

    STEVAL-IFP047V1 expansion board: digital interface section ........
  • Page 19 ST’s terms and conditions of sale in place at the time of order acknowledgment. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of purchasers’...

Table of Contents