Stairville Outdoor Stage PAR Hex TR1 User Manual page 23

7.1.4 Operating mode 'Automatic'
1. Press [MODE] to activate the main menu.
2. Press repeatedly [MODE] and select the menu item 'Slave' .
3. Confirm the selection with [SET] and use [UP] or [DOWN] to choose between 'Yes' (Slave
mode on) and 'No' (Slave mode off).
4.
To exit the menu item without making changes, press [MODE].
In automatic mode, all programmed shows are played sequentially in an endless loop.
A preprogrammed automatic show can only be activated when the unit is operating in stand-
alone mode or as master in a master / slave combination. This setting is only relevant if the
device is not controlled via DMX.
1. Press [MODE] to activate the main menu.
2. Press repeatedly [MODE] and select the menu item 'Auto' .
3. Confirm the selection with [SET] and use [UP] or [DOWN] to choose between 'Yes' (Auto
mode on) and 'No' (Auto mode off).
4.
To exit the menu item without making changes, press [MODE].
Outdoor Stage PAR Hex TR1, Outdoor Stage PAR Hex TR1 WH
LED PAR
Operating
23