7.1.2 Operating mode 'DMX'
DMX address
If you do not press any key for about 30 seconds, the display will automatically be
locked. The display shows the current operating mode, the software version and the
device temperature. To cancel the lock, hold down [MODE] and [SET] simultaneously
for three seconds.
1.
Press [MODE] to activate the main menu.
2.
Press repeatedly [MODE] and select the menu item 'DMX' .
3.
Confirm the selection with [SET] and use [UP] or [DOWN] to select the menu item
'Address' .
4.
Confirm the selection with [SET] and use [UP] or [DOWN] to select a value between '001'
and '512' to set the desired DMX address.
5.
To exit the menu item without making changes, press [MODE].
Make sure that this number matches the configuration of your DMX controller. The following
table shows the highest possible DMX address for the various DMX modes.
Outdoor Stage PAR Hex TR1, Outdoor Stage PAR Hex TR1 WH
LED PAR
Operating
21