Forno FBOEL1358-30 Instruction Manual page 13

Setting funcation
To access the setting function, press the Settings button on the switch panel. There are seven Settings.
You can press the Settings button repeatedly to select the Settings
Parameter that can
be set
Clock
Temp unit
Sound
Calibration
Demo mode
12/24 H
Sabbath
Setting clock:
Touch the Settings once to enter the clock setting. By default, the current time is 12:00
Setting temp unit:
Press the Settings button twice. The interface displays the default unit to set the temperature unit.
The default unit is Fahrenheit set sound
Set sound:
Sound is used to control whether or not the buttons sound, but the work tone is always present. Press
the Settings button three times. The current sound status is displayed in the middle of the screen. On
Setting Demo mode:
This parameter is set to facilitate users to enter the demonstration mode and perform operations on
the interface in any mode. However, heating components such as the electric heat pipe are not enabled.
The default value is OFF. Press the Settings key 5 times to enter the demo, then press the number key 1
Touch Settings
repeatedly
Touch one
Touch twice
Touch three
Touch four
Touch seven
Set clock
Press1：Degree F/C
Press1：
Press1 to change mode
Then Press3 to increase
Press6 to decrease
Press1：
Press1：12 H/24 H
Press1：
Default
12:00PM
F
On
00°F (-30°F - 30°F)
12 H