Supermicro SuperServer SYS-2029UZ-TN20R25M User Manual page 54

SuperServer 2029UZ-TN20R25M User's Manual
Changing the Power Supply Module:
1. Unplug the AC cord from the module to be replaced.
2. On the back of the module, push the release tab sideways, as illustrated.
3. Pull the module out using the handle.
4. Push the new power supply module into the power bay until it clicks. Replace with the
same model.
5. Plug the AC power cord back into the module.
Release Tab
Figure 3-14. Replacing a Power Supply Module
54