Seatalkng Pilot Controller Connection - Raymarine Evolution EV-2 Installation Instructions Manual

11.1 SeaTalkng pilot controller connection

A SeaTalkng ® pilot controller is connected directly into the same SeaTalkng ® backbone as the EV
autopilot.
1. SeaTalkng ® MFD (MFDs require a separate power supply.)
2. SeaTalkng ® spur cable
3. SeaTalkng ® pilot controller (powered from the SeaTalkng ® backbone.)
4. SeaTalkng ® autopilot
5. SeaTalkng ® 12 V dc power supply connection
6. SeaTalkng ® 5-way block
58