Surface Mounting Using The Riser - Raymarine Evolution EV-2 Installation Instructions Manual

Surface mounting using the Riser

The optional Deck Mounting kit (A80437) can be used to raise the product from the mounting surface,
for installations where the cabling needs to be above-surface.
The Wall bracket is not required when using the Riser.
1. Use the Deck Mount riser template (87280) provided with the kit (A80437) to drill 4 holes in the
mounting surface. Secure the Riser to the mounting surface using the 4 supplied fixings.
2. Place the small sealing ring in the groove located on the bottom of the mounting tray.
38