Safety Instructions; Intended Use; Device Elements - Würth CHARGER PRO 5 Original Operating Instructions

GB
Please read and comply with these operating instructions prior to initial
operation of your device.
Keep these operating instructions for later use or for a subsequent owner.
WARNING - Prior to first use always read the Safety instructions! Failure to observe
the instruction manual and the safety instructions could result in damage to the device and
danger for the operator and others.
Note
Modification of the device or manu-
facturing of additional devices is not
permitted. Such modifications can
result in personal injury or malfunc-
tions.
Only appointed and trained personnel may
■
carry out repairs to the device. For such
purposes, always use original spare parts from
Adolf Würth GmbH & Co. KG. This will ensure
the continuing safe operation of the device.
In the event of damage to the housing, plug
■
or cable, do not use the device and contact
Würth Masterservice.
Charge only NiMH or NiCd batteries. Use
■
of other batteries will result in an explosion
hazard!
Use Würth batteries!
■
Pay attention to the polarity (+/-) when
■
inserting the batteries!
Do not open the device!
■

Intended use

The device is only designed for charging Ni-Cd and
Ni-MH batteries. Any other use is considered an
improper use.
The user is solely responsible for damage
resulting from improper use.
8
For Your Safety

Safety Instructions

Keep the battery charging compartment free
■
from dirt and moisture. Ensure the device is
stored in a dry place free of frost.
This device is not intended for use by persons
■
(including children) with restricted physical,
sensory or mental capacity, or persons who
lack experience and knowledge of how to use
this device. Such persons must be instructed
by a supervisory person responsible for their
safety or must be supervised during operation
of the device!
Do not operate the device unsupervised!
■
Failure to observe the safety instructions may
■
result in damage to the device, to the batteries
or injuries to persons!
If the device is not used for a prolonged
■
period, remove the batteries to prevent leaking
and hence damage to the device.
Use only genuine Würth accessories
■
and spare parts.
Overview [Fig. I]
1 Charger
2 Charging slot
3 LC display
4 Control buttons
5 Charging slot buttons
6 Hollow plug socket
7 Mains power pack
8 Hollow plug
9 Cigarette lighter plug

Device elements