Page 1
BBBBBBBBBBUK B BLLLLL BLLLLLL Keep this Assembly Manual for future reference Two Adults recommended for assembly This product is not intended for commercial use Do NOT return this product! For missing or broken parts - cseurope@dorel.com - Call 01942 524100...
Do NOT return this product! Contact our friendly customer service team first for help Call us! 01942 524100 cseurope@dorel.com Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1-2 ESTIMATED ASSEMBLY TIME: 1 HOUR - Open your item in the area you plan to keep it for less heavy lifting...
Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please beware to slow down and stop when screw is tight.
Page 4
Blarl Illnt f lat ln Nlt altual llzl T1642013010UD T1642013020UD T1642013030UD TOP PANEL LEFT SIDE PANEL RIGHT SIDE PANEL T1642013040UD T1642013050UD T1642013060UD BOTTOM PANEL BOTTOM APRON TOP APRON T1642013070UD T1642013080UD T1642013090UD CENTER APRON LEFT DRAWER SIDE RIGHT DRAWER SIDE...
Page 5
Blarl Illnt f lat ln Nlt altual llzl T1642013110UD T1642013100UD T1642013120UD FRONT DRAWER BACK DRAWER DRAWER BOTTOM T1642013130UD T1642013140UD DRAWER SUPPORT BACK PANEL...
Page 6
LLLdLLLL BLg RLfLLLLLL NumbLL: BBBBBBBBBBBBBB Part Lllt Nlt Altual llzl TUD0001 TUD0002 TUD0004 TUD0009 Cal Bllt Cal Llll DOWEL CBS 4 x 38 15-12 M8 X 25 x1 SET TUD0064 TUD0070 TUD0008 TUD0021 BIG SQUARE PH M4 X 14 CBS 3l5 x 16 ANTI TIPPING KIT HANDLE x3 SETS...
Page 7
Stlp 1 Proper orientation of CAM LOCK TUD0002 TUD0008 TUD0001 x3 SETS TUD0017 TUD0004 RIGHT LEFT * raw edges are shaded...
Page 8
Stlp 2 Proper orientation of CAM LOCK TUD0002 TUD0004 TUD0001 TUD0021 FRONT * raw edges are shaded...
Page 9
Stlp 3 Proper orientation of CAM LOCK TUD0002 TUD0004 TUD0001 * raw edges are shaded...
Page 10
Stlp 4 Proper orientation of CAM LOCK * raw edges are shaded...
Page 11
Stlp 5 Proper orientation of CAM LOCK * raw edges are shaded...
Page 12
Stlp 6 Proper orientation of CAM LOCK * raw edges are shaded...
Page 13
Stlp 7 Proper orientation of CAM LOCK * raw edges are shaded...
Page 14
Stlp 8 Proper orientation of CAM LOCK TUD0002 * raw edges are shaded...
Page 21
Stlp 15 x3 SETS TUD0016 TUD0008 * raw edges are shaded...
Page 22
Stlp 16 TUD0070 TUD0064 * raw edges are shaded...
Page 23
For Masonry, Concrete, or other wall materials: Consult your local hardware store for appropriate anchors to securely attach the safety bracket. IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT.
Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 50 lbll 23 lg 35 lbll 16 lg Ealh lrawlrl Warning: Risk of serious injury to person - do not place a television on this furniture. This furniture is not approved for use with a television.
Need help?
Do you have a question about the 1642013COMUK and is the answer not in the manual?
Questions and answers