Advertisement
Rocker and flat push buttons
Two different styles of push buttons are included in the dimmer packaging, rocker and
flat push button styles. These are interchangeable, depending on customer preferences.
Coloured Bezels
The dimmer's LED indicators are white and the pre-fitted bezel provides a white glow
around the dimmer button. Interchangeable blue, green and orange bezels rings are also
included with the dimmer. These can be used to change the colour of the LED indicators
to match customer colour preferences and/or to more easily identify different
+
LEDsmart
devices on the same grid plate.
Installing LEDsmart
Adaptor kits are available separately to enable LEDsmart
plates. Order codes are as follows.
DGACCESSPK2
DGACCESSPK3
Dimmer Setup
+
The LEDsmart
push button dimmer has a number of useful functions which can easily be set up by entering setup mode and
following three easy steps.
It is recommended that the MINIMUM BRIGHTNESS is always setup. The other settings are optional, depending on the dimmer
application. To set the minimum brightness now, go to the next page.
Dimmer Setup Functions
Function
Entering Setup Mode
Setting Minimum Brightness
Setting Maximum Brightness
Setting the Kick Start Feature
Setting Off State LED Feature
Setting Separate Switch Mode
Setting Toggle / Memory Dimmer
Setting MultiMate™ Mode
Factory Defaults Reset
+
devices into Clipsal Saturn™ or Clipsal Saturn Zen™ wall plates
+
Adaptor kit for LEDsmart
+
Adaptor kit for LEDsmart
See Part
See page 9
See page 10
See online guide
See online guide
See online guide
See online guide
See online guide
See online guide
See online guide
+
devices to be installed into Clipsal Saturn™ or Clipsal Saturn Zen™ wall
Push Button devices
Rotary dimmers
Push Button Dimmer/Switch
8
Advertisement
