Advertisement
Wiring for multi-way (three-way or more) dimming and switching
To achieve multi-way dimming and switching using LEDsmart
parallel. Note that each LEDsmart
required to provide multi-way dimming and on/off control.
The diagram below shows the required wiring for three-way dimming and switching using LEDsmart
three-way control is required, further LEDsmart
New Installation – multi-way (three-way or more) dimming/switching
Three-way dimming and switching using LEDsmart
dimmer is simply wired in parallel.
Replacing existing multi-way switching with multi-way dimming and switching
Existing three-way switching
Traditional three-way switching using two rocker switches
and one intermediate switch, with strappers between the
switches.
+
dimmer has an integrated switch, therefore no separate switches or additional strappers are
+
devices are simply wired in parallel.
+
dimmers. Note that each two-wire LEDsmart
+
dimmers, the required number of dimmers can be connected in
Replacement three-way dimming/switching
Rocker switches and intermediate switch replaced with
+
LEDsmart
dimmers. The existing strappers are used to connect
the dimmers in parallel. No new wiring is required.
Push Button Dimmer/Switch
+
dimmers. If more than
+
7
Advertisement
