Storage & Maintenance; Specific Maintenance - Mi-T-M THE CHORE MASTER CV Series Operation Manual

Cold water vertical pressure washer
Table of Contents

Advertisement

Available languages

Available languages

STORAGE & MAINTENANCE

SPECIFIC MAINTENANCE:

ENGINE: The engine instructions that accompany your unit detail specific
procedures for maintenance of the engine. Following the engine manufac-
turer's recommendations will extend engine work life.
PUMP: Factory sealed system. Contact customer service with system prob-
lems.
NOZZLES: Water flow through the spray nozzle will erode the orifice, making
it larger, resulting in a pressure loss. Nozzles should be replaced whenever
pressure is less than 85% of the maximum. The frequency of replacement
will depend upon such variables as mineral content in the water and number
of hours the nozzle is used.
QUICK COUPLERS: There is an o-ring seal inside the female quick coupler.
This o-ring will deteriorate or, if the unit is allowed to pump without the high
pressure hose or nozzle attached, the o-ring may be blown out occasionally.
Simply insert a replacement o-ring to correct the leak. (Additional o-rings can
be purchased from your dealer.)
16
Operator's Manual

Advertisement

Chapters

Table of Contents
loading

Table of Contents