Kaiser KS 80 Series User Manual page 6

6
EN
IINSTALLATION
INSTRUCTIONS
ELECTRICAL CONNECTION
Before connecting the refrigerator to
the mains power supply, make sure
that:
• The supply voltage corresponds to
the specifications on the data plate
on the front of the oven.
• The mains supply has an efficient
ground connection complying with
all applicable laws and regulations.
Correct grounding is a legal require-
ment. If the appliance is not pre-fitted
with a power cable and/or plug, use
only suitable cables and plugs capable
of handling the power specified on the
appliance's data plate and capable of
resisting heat. The power cable should
never reach a temperature of 50 °C at
any point along its length.
If the appliance is to be connected
directly to mains terminals, fit a switch
with minimum aperture of 3 mm
between the contacts. Make sure that
the switch is of sufficient capacity for
the power specified on the appliance's
data plate, and compliant with applica-
ble regulations. The switch must not
break the yellow-green earth wire. The
socket or switch must be easily reach-
!
Attention! Installation and electrical
connection must be executed by a
qualified expert only.
!
Attention! The manufacturer
declines all responsibility for
damage or injury if the above
instructions and normal safety
precautions are not respected.