Kaiser Avantgarde Pro KS 90 Series User Manual page 6

Table of Contents

Advertisement

6
EN
IINSTALLATION
INSTRUCTIONS
ELECTRICAL CONNECTION
Before connecting the refrigerator to
the mains power supply, make sure
that:
• The supply voltage corresponds to
the specifications on the data plate
on the front of the oven.
• The mains supply has an efficient
ground connection complying with
all applicable laws and regulations.
Correct grounding is a legal require-
ment. If the appliance is not pre-fitted
with a power cable and/or plug, use
only suitable cables and plugs capable
of handling the power specified on the
appliance's data plate and capable of
resisting heat. The power cable should
never reach a temperature of 50 °C at
any point along its length.
If the appliance is to be connected
directly to mains terminals, fit a switch
with minimum aperture of 3 mm
between the contacts. Make sure that
the switch is of sufficient capacity for
the power specified on the appliance's
data plate, and compliant with applica-
ble regulations. The switch must not
break the yellow-green earth wire. The
socket or switch must be easily reach-
!
Attention! Installation and electrical
connection must be executed by a
qualified expert only.
!
Attention! The manufacturer
declines all responsibility for
damage or injury if the above
instructions and normal safety
precautions are not respected.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avantgarde pro ks 90500 rs

Table of Contents