3
3
2
3
12
1
3
EN
Handle installation
• Use a cross recessed screwdriver to
set the bolts 1 to the door (if not
already installed) as shown in the
illustration.
• Tighten the holder bolts securely.
• Place the handle 2 from above as
per the direction shown at the picture
and hang the handle above on the
set bolts.
• Using the supplied hexagon spanner
set screws into the threaded holes 3
and tighten them gently.
• Ensure that the handle is well
erected.
Leveling feet *
• Turn the feet 3 clockwise or counter-
clockwise to achieve a stable
position of the refrigerator.
* - if available