1. Manuals
  2. Brands
  3. protech Manuals
  4. Computer Hardware
  5. SA-5082
  6. User manual

protech SA-5082 User Manual

Intel® atom™ n455/d525 mini-itx mb with vga/lvds/audio/2lan
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
USER'S
MANUAL
SA-5082
M3
SA-5082
®
Intel
Atom™ N455/D525
Mini-ITX MB with
VGA/LVDS/Audio/2LAN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SA-5082 and is the answer not in the manual?

Questions and answers

Related Manuals for protech SA-5082

Summary of Contents for protech SA-5082

  • Page 1 USER’S MANUAL SA-5082 ® Intel Atom™ N455/D525 Mini-ITX MB with VGA/LVDS/Audio/2LAN SA-5082...
  • Page 2 Copyright Notice ® SA-5082 Intel Atom™ D525/N455 Mini-ITX Motherboard With VGA/ LVDS/ Audio/ 2LAN COPYRIGHT NOTICE This user’s manual is meant to assist users in installing and setting up the system. The information contained in this document is subject to change without any notice.
  • Page 3 Copyright Notice FCC NOTICE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

  • Page 4: Table Of Contents

    Contents TABLE OF CONTENTS CHAPTER 1 INTRODUCTION About This Manual…............System Specification…............1-3 Safety Precautions…............CHAPTER 2 SYSTEM CONFIGURATION Jumper & Connector Quick Reference Table…....Component Locations…............ How to Set the Jumpers…..........Clear CMOS Data Selection….…………………………. LVDS Panel Voltage Selection….……………..…… Reset/ NMI Watchdog Selection………………..…..
  • Page 5 APPENDIX A EXPANSION BUS & SYSTEM ASSEMBLY PCI Bus Pin Assignment………………………………………... Mini-PCIe Bus Pin Assignment………………………………… Compact Flash Card Pin Assignment…………………………… DC Jack Pin Assignment………………………………………... Exploded Diagram for SA-5082 Whole System………………... APPENDIX B TECHNICAL SUMMARY Block Diagram…................Interrupt Map…................DMA Channels Map………............

  • Page 6: Chapter 1 Introduction

    CHAPTER INTRODUCTION This chapter gives you the information for SA-5082. It also outlines the System specification. Section includes: About This Manual System Specifications Safety precautions Experienced users can skip to chapter 2 on page 2-1 for Quick Start. Page:1-1...

  • Page 7: About This Manual

    Atom ™ D525/N455 Mini-ITX Motherboard with VGA/LVDS/Audio/2LAN, which is fully PC/AT compatible. SA-5082 provides faster processing speed, greater expandability and can handle more tasks than before. This manual is designed to assist you how to install and set up the system. It contains four chapters. You can apply...

  • Page 8: System Specification

    1 x 3.5" SATA HDD & 1 x Slim DVD-ROM or 2 x Drive Bay 2.5” SATA HDD / 1 x DVD-ROM Expansion Slots 1 x CF slot, 1 x mini PCIe slot, 1 x PCI slot ′ Page: 1-3 SA-5082 USER S MANUAL...
  • Page 9 Chapter 1 Introduction ENVIRONMENT Operation Temp. 0~40°C Storage Temp. -20~60°C Humidity 20~90% Page: 1-4 ′ SA-5082 USER S MANUAL...

  • Page 10: Safety Precautions

    3. Disconnect power when you change any hardware devices. For instance, when you connect a jumper or install any cards, a surge of power may damage the electronic components or the whole system. ′ Page: 1-5 SA-5082 USER S MANUAL...
  • Page 11 CHAPTER HARDWARE CONFIGURATION ** QUICK START ** Helpful information that describes the jumper and connector settings, and component locations. Sections included: Jumper & Connector Quick Reference Table Component Locations Configuration and Jumper settings Connector’s Pin Assignments Page 2-1...

  • Page 12: Jumper & Connector Quick Reference Table

    USB1, USB2 USB & LAN Connector JRJ45USB1, JRJ45USB2 Sound Connector AUDIO1 LVDS Connector LVDS1 Inverter Connector Hardware Power Fail Selection LED Connector L_LED1 Printer Connector LPT1 Memory Installation DIMM1, DIMM2 VGA Connector VGA1 Page: 2-2 ′ SA-5082 USER S MANUAL...

  • Page 13: Component Locations

    PCI1 Intel Intel Atom ICH8M N455/D525 LVDS1 DIMM1 72 74 71 73 SYS_FAN1 72 74 71 73 USB1 USB2 DIMM2 DIO1 SATA1 M_PCIE1 L_LED1 SATA3 SATA2 ATX_PWR1 SA-5082 Connector, Jumper and Component locations ′ Page: 2-3 SA-5082 USER S MANUAL...

  • Page 14: How To Set The Jumpers

    PIN1 & PIN2 to create one setting by shorting. You can either connect PIN2 & PIN3 to create another setting. The same jumper diagrams are applied all through this manual. The figure below shows what the manual diagrams look and what they represent. Page: 2-4 ′ SA-5082 USER S MANUAL...
  • Page 15 Jumper Block looks like this JUMPER SETTINGS 2 pin Jumper close(enabled) Looks like this 3 pin Jumper 2-3 pin close(enabled) Looks like this Jumper Block 1-2 pin close(enabled) Looks like this ′ Page: 2-5 SA-5082 USER S MANUAL...

  • Page 16: Clear Cmos Data Selection

    *To clear CMOS data, user must power-off the computer and set the jumper to “Clear CMOS” as illustrated above. After five to six seconds, set the jumper back to “Normal” and power-on the computer. Page: 2-6 ′ SA-5082 USER S MANUAL...

  • Page 17: Lvds Panel Voltage Selection

    2-5. LVDS PANEL VOLTAGE SELECTION ： ： ： ： L VDS Panel Voltage Selection The pin assignments are as follows: JUMPER SETTING JUMPER SELECTION (PIN CLOSED) ILLUSTRATION 3.3V Note: Manufacturing Default – 3.3V ′ Page: 2-7 SA-5082 USER S MANUAL...

  • Page 18: Reset/ Nmi Watchdog Selection

    2-6. RESET/ NMI WATCHDOG SELECTION ： ： ： ： R eset/ NMI Watchdog Selections The pin assignments are as follows: JUMPER SETTING JUMPER SELECTION (PIN CLOSED) ILLUSTRATION RESET Note: Manufacturing Default – RESET Page: 2-8 ′ SA-5082 USER S MANUAL...
  • Page 19 This connector is used to set the COM3 function. The jumper settings are as follows: JUMPER SETTINGS JUMPER SELECTION (PIN CLOSED) ILLUSTRATIONS RS-232 All Open RS-422 1-2, 3-4, 9-10 RS-485 1-2, 5-6, 7-8 Note: Manufacturing default – RS-232 ′ Page: 2-9 SA-5082 USER S MANUAL...

  • Page 20: Com3/4 Ri & Voltage Selection

    2-8. COM3/4 RI & VOLTAGE SELECTION JP_COM3 : COM3 RI & Voltage Selection The selections are as follows: JUMPER SETTING JUMPER SELECTION (PIN CLOSED) ILLUSTRATION JP_COM3 JP_COM3 JP_COM3 Note: Manufacturing Default – RI Page: 2-10 ′ SA-5082 USER S MANUAL...
  • Page 21 Chapter 2 Hardware Configuration JP_COM4 : COM4 RI & Voltage Selection The selections are as follows: JUMPER SETTING JUMPER SELECTION (PIN CLOSED) ILLUSTRATION JP_COM4 JP_COM4 JP_COM4 Note: Manufacturing Default – RI ′ Page: 2-11 SA-5082 USER S MANUAL...

  • Page 22: Com Port Connector

    The pin assignment is as follows: COM2 ASSIGNMENT DCD1 DTR1 DSR1 COM1 RTS1 CTS1 COM2 : COM2 Connector The COM2 is fixed as RS-232. The pin assignment is as follows: ASSIGNMENT DCD2 DTR2 DSR2 RTS2 CTS2 Page: 2-12 ′ SA-5082 USER S MANUAL...
  • Page 23 The pin assignment is as follows: ASSIGNMENT DCD4 DTR4 COM4 DSR4 RTS4 CTS4 Note: COM4’s pin 9 is selectable for RI, +5V or +12V. For more information, please refer to our “COM RI and Voltage Selection”. ′ Page: 2-13 SA-5082 USER S MANUAL...

  • Page 24: Reset Connector

    The pin assignment is as follows: ASSIGNMENT JPANEL1 RST_BTN 2-12. HARD DISK DRIVE LED CONNECTOR JPANEL1 (1, 3) : Hard Disk Drive LED Connector The pin assignment is as follows: ASSIGNMENT HD_LED+ JPANEL1 HD_LED- Page: 2-14 ′ SA-5082 USER S MANUAL...

  • Page 25: Atx Power Button

    JPANEL1 (6, 8, 10, 12) : External Speaker Connector The pin assignment is as follows: ASSIGNMENT JPANEL1 P_SPK P_SPK P_SPK 2-15. POWER LED CONNECTOR JPANEL1 (2, 4) : Power LED Connector The pin assignment is as follows: ASSIGNMENT PW_LED+ JPANEL1 PW_LED- ′ Page: 2-15 SA-5082 USER S MANUAL...

  • Page 26: Cpu Fan Connector

    The pin assignment is as follows: ASSIGNMENT LPC1_FANPWM1 +12V CPU_FAN1 LPC1_FANIO1 2-17. SYSTEM FAN CONNECTOR ： ： ： ： SYS_FAN1 S ystem Fan connector The pin assignment is as follows: ASSIGNMENT LPC1_FANPWM2 +12V LPC1_FANIO2 SYS_FAN1 Page: 2-16 ′ SA-5082 USER S MANUAL...

  • Page 27: Dio Connector

    DIO1 DOUT0 DIN3 DIN1 DOUT3 2-19. ATX POWER CONNECTOR JPWR1 ： ： ： ： A TX Connector The pin assignments are as follows: ATX_PWR1 ASSIGNMENT ASSIGNMENT +3.3V +3.3V +3.3V -12V PSON 5VSB +12V ′ Page: 2-17 SA-5082 USER S MANUAL...

  • Page 28: Serial Ata Connector

    Chapter 2 Hardware Configuration 2-20. SERIAL ATA CONNECTOR SATA1, SATA2: The SA-5082 possesses two Serial ATA Connectors. The pin assignments are as follows: SATA1 ： ： ： ： S ATA Connector The pin assignments are as follows: ASSIGNMENT SATA1 SATA_TXP0...
  • Page 29 Chapter 2 Hardware Configuration SATA3 ： ： ： ： S ATA Connector The pin assignments are as follows: ASSIGNMENT SATA3 SATA_TXP2 SATA_TXN2 SATA_RXN2 SATA_RXP2 ′ Page: 2-19 SA-5082 USER S MANUAL...

  • Page 30: Universal Serial Bus Connector

    The pin assignments are as follows: ASSIGNMENT VCCUSB01 VCCUSB01 USB1 USB0N USB1N USB0P USB1P USB2 ： ： ： ： U niversal Serial Bus Connector The pin assignments are as follows: ASSIGNMENT VCCUSB23 VCCUSB23 USB2 USB2N USB3N USB2P USB3P Page: 2-20 ′ SA-5082 USER S MANUAL...

  • Page 31: Usb & Lan Connector

    Orange Color on Giga LAN Speed Indicator No LAN switch/hub connected Right side LED: Yellow Color Blinking LAN Message Active No LAN Message Active USB Signal: ASSIGNMENT VCCUSB67 USB7N USB7P VCCUSB67 USB6N USB6P ′ Page: 2-21 SA-5082 USER S MANUAL...
  • Page 32 Orange Color on Giga LAN Speed Indicator No LAN switch/hub connected Right side LED: Yellow Color Blinking LAN Message Active No LAN Message Active USB Signal: ASSIGNMENT VCCUSB45 USB5N USB5P VCCUSB45 USB4N USB4P Page: 2-22 ′ SA-5082 USER S MANUAL...

  • Page 33: Sound Connector

    SPDIF (inside the Line-In hole) ASSIGNMENT AC_SPDIF0 Line-In: light blue color LINE_IN & SPDIF ASSIGNMENT LINE_L SPK_OUT LINE_R MIC_IN SPK-Out: light green color ASSIGNMENT AUDIO1 SPK_L SPK_R Mic-In: pink color ASSIGNMENT MIC_IN1 MIC_IN2 ′ Page: 2-23 SA-5082 USER S MANUAL...

  • Page 34: Lvds Connector

    LVDS0_D2-(Odd) LVDS1 LVDS0_D1+(Odd) LVDS0_D1-(Odd) LVDS0_D0+(Odd) LVDS0_D0-(Odd) LVDS_VCC LVDS_VCC 2-25. INVERTER CONNECTOR ： ： ： ： I nverter Connector The pin assignments are as follows: ASSIGNMENT +12V +12V ENABKL (Inverter backlight ON/OFF control signal) Page: 2-24 ′ SA-5082 USER S MANUAL...

  • Page 35: Hardware Power Fail Selection

    SELECTION (PIN CLOSED) ILLUSTRATION Enable Disable Open Note: Manufacturing Default – Disable 2-27. LED CONNECTOR L_LED1 ： ： ： ： L ED Connector The pin assignments are as follows: ASSIGNMENT +3.3V L_LED1 LINK_LEDJ ′ Page: 2-25 SA-5082 USER S MANUAL...

  • Page 36: Printer Connector

    LPT1 SLCTJ 2-29. MEMORY INSTALLATION ® Intel Atom D525 processor can support up to 4GB; DRAM BANK CONFIGURATION: TOTAL MEMORY DIMM1 DIMM2 SIZE 256 MB 256 MB 512 MB 512 MB 512 MB Page: 2-26 ′ SA-5082 USER S MANUAL...
  • Page 37 ODT1 DQS6 DQ31 /CS1 DQ54 DQ12 CKE0 DQ50 CKE1 TEST DQ55 DQ13 VREFCA DQ51 /DQS1 DQ32 DQ60 DQ36 DQ56 DQS1 DQ33 DQ61 /RESET DQ37 DQ57 DQ10 /DQS4 /DQS7 DQ14 DQ11 DQS4 DQS7 DQ15 ′ Page: 2-27 SA-5082 USER S MANUAL...
  • Page 38 Chapter 2 Hardware Configuration ASSIGNMENT ASSIGNMENT ASSIGNMENT ASSIGNMENT DQ38 DQ58 DQ16 DQ34 DQ62 DQ20 DQ39 DQ59 DQ17 DQ35 DQ63 DQ21 DQ44 /DQS2 DQ40 /EVENT DQ45 VDDSPD DQS2 DQ41 DQ22 /DQS5 DQ18 Page: 2-28 ′ SA-5082 USER S MANUAL...

  • Page 39: Vga Connector

    Chapter 2 Hardware Configuration 2-30. VGA CONNECTOR VGA1: VGA Connector The pin assignments are as follows: VGA1 ASSIGNMENT CRTRED CRTGREEN CRTBLUE CRT_ALWAYS_ON CRTVCC_L CRTDATA HSYNC VSYNC CRTCLK ′ Page: 2-29 SA-5082 USER S MANUAL...
  • Page 40 CHAPTER SOFTWARE UTILITIES This chapter comprises the detailed information of VGA driver, LAN driver, and Sound driver. Section includes: ® Intel Chipset Software Installation Utility VGA Driver Utility LAN Driver Utility SOUND Driver Utility Page: 3-1...
  • Page 41 Enclosed with our SA-5082 package, you will find a CD ROM disk containing all types of drivers we have. As a SA-5082 user, you will only need the some of the files contained in the CD ROM disk; please take note of the following...
  • Page 42 Click infinst911autol.exe file for utility installation. Follow the instructions on the screen to complete the installation. Once installation is completed, shut down the system and restart in order for the changes to take effect. ′ Page:3-3 SA-5082 USER S MANUAL...
  • Page 43 Chapter 3 Software Utilities 3-3. VGA DRIVER UTILITY The VGA interface is embedded with our SA-5082 system to support CRT display. The following illustration briefly shows you the content of VGA driver in D:\Driver\VGA. 3-3-1. Installation of VGA Driver 1. Start the computer (Win XP//7).
  • Page 44 Chapter 3 Software Utilities 3-4. LAN DRIVER UTILITY 3-4-1. Introduction The SA-5082 is enhanced with LAN function that can support various network adapters. The content of the LAN driver is found as follows: For more details on Installation procedure, please refer to Readme.txt file found on LAN DRIVER UTILITY.
  • Page 45 2. Click on [Next] to continue the procedure. If the Windows popup "Windows can't verify the publisher of this driver software" message, press "Install this driver software anyway" to continue the installation. Finally, select to restart the system and press [Finish] to complete the installation. Page:3-6 ′ SA-5082 USER S MANUAL...
  • Page 46 CHAPTER BIOS SETUP This chapter shows how to setup the AMI BIOS. Section includes: Introduction Entering Setup Main Advanced PCIPnP Boot Security Chipset Exit Page: 4-1...
  • Page 47 BIOS setup menu functions itself and preventing unauthorized users from booting the system from peripheral devices. The following diagram illustrates the relationships between system hardware, BIOS, operating system, and application program: Page: 4-2 ′ SA-5082 USER S MANUAL...
  • Page 48 BIOS setup program. In a moment, the main menu of the AMI SETUP program will be shown on the screen: ′ Page: 4-3 SA-5082 USER S MANUAL...
  • Page 49 You may move the cursor by up/down keys to highlight the individual menu items. As you highlight each item, a brief description of the highlighted selection will appear at the right side of the screen. Page: 4-4 ′ SA-5082 USER S MANUAL...
  • Page 50 System Time This setting allows you to set the system time. The format is [Hour: Minute: Second]. You can directly key-in value or use <+> or <-> arrow keys to increase/decrease it. ′ Page: 4-5 SA-5082 USER S MANUAL...
  • Page 51 Enter Go to Sub Screen General Help F10 Save and Exit ESC Exit v02.68 (c)Copyright 1985-2009 American Megatrends, Inc. Advanced Screen This menu provides advanced configurations such as CPU Configuration, IDE Configuration, SuperIO Configuration…etc. Page: 4-6 ′ SA-5082 USER S MANUAL...
  • Page 52 CPUs. Enable this function will improve parallelization of computation performed on PC microprocessor. For each processor core that is physically present, the operation system addresses two virtual processors, and shares the workload between them when possible. ′ Page: 4-7 SA-5082 USER S MANUAL...
  • Page 53 Windows NT. If user want to install mainstream operating system such as Windows XP, Vista or Win7, it is recommended to select [Enhanced] for better hard drive performance. Configure SATA as This setting specifies the function of the on-chip SATA controller Page: 4-8 ′ SA-5082 USER S MANUAL...
  • Page 54 (c)Copyright 1985-2009 American Megatrends, Inc. Primary IDE Master Screen Type Select the type of device connected to the system. LBA/Large Mode Enabling LBA causes Logical Block Addressing to be used in place of Cylinders, Heads and Sectors. ′ Page: 4-9 SA-5082 USER S MANUAL...
  • Page 55 This gives you an opportunity to move data from a hard disk that is going to fail to a safe place before the hard disk becomes offline. 32Bit Data Transfer Enables/Disable 32-bit data transfer. Page: 4-10 ′ SA-5082 USER S MANUAL...
  • Page 56 Select IO address as serial ports default resource. Serial Port1~4 IRQ Select IO IRQ as serial ports default resource. Parallel Port Address Select IO address for parallel ports resource allocation. Parallel Port Mode Select the operation mode for parallel port. ′ Page: 4-11 SA-5082 USER S MANUAL...
  • Page 57 (c)Copyright 1985-2009 American Megatrends, Inc. Hardware Health Configuration System Temperature This section shows system current temperature. CPU Temperature This section shows CPU current temperature. VCORE / 12V / VSB These items provide hardware health information. Page: 4-12 ′ SA-5082 USER S MANUAL...
  • Page 58 AC power restore back. Resume On Ring An input signal on the serial Ring Indicator (RI) line (in other words, an incoming call on the modem) awakens the system from a soft of state. ′ Page: 4-13 SA-5082 USER S MANUAL...
  • Page 59 Set a specific date value for RTC alarm function to wake up the system from soft off state. System Time Set a specific time value for RTC alarm function to wake up the system from soft off state. Page: 4-14 ′ SA-5082 USER S MANUAL...
  • Page 60 MS-DOS or SCO Unix. USB 2.0 Controller Mode Configure the onboard USB 2.0 controller operation mode to high Speed or full speed mode. USB Beep Message System will generate beep sound during USB device enumeration. ′ Page: 4-15 SA-5082 USER S MANUAL...
  • Page 61 Emulation Type Select which type of device that USB mass storage emulation. When you select [Auto], the USB storage size less than 530MB will be emulated as floppy drive and remaining as hard drive. Page: 4-16 ′ SA-5082 USER S MANUAL...
  • Page 62 F10 Save and Exit ESC Exit v02.68 (c)Copyright 1985-2009 American Megatrends, Inc. PCIPnP screen PCI IDE BusMaster This function allows the BIOS to use PCI BusMastering for reading or writing to IDE drives. ′ Page: 4-17 SA-5082 USER S MANUAL...
  • Page 63 Select Screen Select Item Enter Go to Sub Screen General Help F10 Save and Exit ESC: Exit v02.68 (c)Copyright 1985-2009 American Megatrends, Inc. Boot Screen This menu provides control items for system boot configuration. Page: 4-18 ′ SA-5082 USER S MANUAL...
  • Page 64 Enable this item allows BIOS POST to skip some tests during boot-up for saving boot time. Quiet Boot When set this option to [disabled], BIOS will display normal POST messages. Parity Check This setting enables or disables memory or parity error check. ′ Page: 4-19 SA-5082 USER S MANUAL...
  • Page 65 Select Screen Select Item Change Option General Help F10 Save and Exit ESC: Exit v02.68 (c)Copyright 1985-2009 American Megatrends, Inc. Boot Device Priority Screen …Boot Device Choose the boot sequence from the available devices.. Page: 4-20 ′ SA-5082 USER S MANUAL...
  • Page 66 Press <Enter> to enter the sub-menu and press < ↑ > or < ↓ > arrow keys to select the device. Another way is to press <+> or <-> to move it up/down in the priority list. ′ Page: 4-21 SA-5082 USER S MANUAL...
  • Page 67 Change User Password User Password controls system access right when power on. These settings allow you to set or change the user password. Page: 4-22 ′ SA-5082 USER S MANUAL...
  • Page 68 North Bridge Configuration South Bridge Configuration Select Screen Select Item Enter Go to Sub Screen General Help F10 Save and Exit ESC: Exit v02.68 (c)Copyright 1985-2009 American Megatrends, Inc. Advanced Chipset Settings Screen ′ Page: 4-23 SA-5082 USER S MANUAL...
  • Page 69 Select which graphics controller to use as the primary boot device. Internal Graphics Mode Select This BIOS feature controls the amount of system memory that is allocated to the integrated graphics processor when the system boots up. Page: 4-24 ′ SA-5082 USER S MANUAL...
  • Page 70 Setting it to DVMT Mode ensures that system memory is dynamically allocated for optimal balance between graphics and system performance. Boot Display Device Choose the default boot display device by user requirement such as [CRT+LVDS]. ′ Page: 4-25 SA-5082 USER S MANUAL...
  • Page 71 ESC: Exit v02.68 (c)Copyright 1985-2009 American Megatrends, Inc. South Bridge Chipset Configuration Screen USB 2.0 Controller Enable or disable the USB 2.0 Controller. HDA Controller Enable or disable the onboard High-definition Audio controller. Page: 4-26 ′ SA-5082 USER S MANUAL...
  • Page 72 Abandon all changes and exit the BIOS setup screen. You can also press the [ESC] key for this operation. Discard Changes Discard all changes done so far to the setup items. You can press the [F7] key for this operation. ′ Page: 4-27 SA-5082 USER S MANUAL...
  • Page 73 Press <Enter> on this item and it will show a confirmation dialog box with a message like below: To use the BIOS failsafe default values, change the prompt to "Ok" and press the <Enter > key. You can also press the [F8] key for this operation. Page: 4-28 ′ SA-5082 USER S MANUAL...
  • Page 74 APPENDIX EXPANSION BUS & SYSTEM ASSEMBLY This appendix indicates the pin assignments. Section includes: PCI BUS Pin Assignment Mini-PCIe BUS Pin Assignment Compact Flash Card Pin Assignment DC Jack Pin Assignment Exploded Diagram for SA-5082 Whole System Page: A-1...
  • Page 75 C/BE0# AD31 AD08 +3.3V +3.3V AD29 AD07 AD28 AD06 +3.3V AD26 AD04 AD27 AD05 AD25 AD03 AD24 AD02 +3.3V GNT2# AD00 C/BE3# AD01 +3.3V +5V(I/O) AD23 +5V(I/O) AD22 REQ64# ACK64# AD20 AD21 AD19 Page: A-2 ′ SA-5082 USER S MANUAL...
  • Page 76 Appendix A Expansion Bu & System Assembly MINI-PCIe BUS CONNECTOR PIN ASSIGNMENT You will find a Mini-PCIe connector in our SA-5082. The pin assignments are as follows: M_PCIE1 ASSIGNMENT ASSIGNMENT WAKE# +3.3V Reserved Reserved +1.5V CLKREQ# Reserved Reserved REFCLK- Reserved...
  • Page 77 Appendix A Expansion Bus & System Assembly COMPACT FLASH CARD PIN ASSIGNMENT There is a Compact Flash connector in SA-5082. The pin assignments are as follows : ASSIGNMENT ASSIGNMENT -CD1 D111 D121 D131 D141 D151 -CS0 -CS11 A102 -VS1 -ATASEL...
  • Page 78 Appendix A Expansion Bu & System Assembly DC JACK PIN ASSIGNMENT There is an external DC jack for SA-5082. The pin assignments are as follows : ASSIGNMENT +12V ′ Page: A-5 SA-5082 USER S MANUAL...
  • Page 79 Appendix A Expansion Bus & System Assembly EXPLODED DIAGRAM FOR SA-5082 WHOLE SYSTEM Page: A-6 ′ SA-5082 USER S MANUAL...
  • Page 80 APPENDIX TECHNICAL SUMMARY This section introduce you the maps concisely. Section includes: Block Diagram Interrupt Map DMA Channels Map I/O Map Watchdog Timer Configuration Flash BIOS Update Page: B-1...
  • Page 81 3 Ports Cash Drawer RJ11 GPIO 4 INPUT / 4 OUTPUT Digital I/O 12V / 24V LPC SIO W83627UHG COM3 (BOX HEADER) COM1 Parallel WatchDog COM4 (BOX HEADER) COM2 RS23/RS422/RS485 RS232 5V / 12V Page: B-2 ′ SA-5082 USER S MANUAL...
  • Page 82 Intel(R) ICH8 Family PCI Express Root Port 1 - 283F Intel(R) 82567V-3 Gigabit Network Connection Intel(R) ICH8 Family USB Universal Host Controller - 2830 Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836 ′ Page: B-3 SA-5082 USER S MANUAL...
  • Page 83 Motherboard resources 0x00000081-0x00000083 Direct memory access controller 0x00000084-0x00000086 Motherboard resources 0x00000087-0x00000087 Direct memory access controller 0x00000088-0x00000088 Motherboard resources 0x00000089-0x0000008B Direct memory access controller 0x0000008C-0x0000008E Motherboard resources 0x0000008F-0x0000008F Direct memory access controller 0x00000090-0x0000009F Motherboard resources Page: B-4 ′ SA-5082 USER S MANUAL...
  • Page 84 Intel(R) 82567V-3 Gigabit Network Connection 0x0000C400-0x0000C41F Intel(R) ICH8 Family USB Universal Host Controller - 2835 0x0000C480-0x0000C49F Intel(R) ICH8 Family USB Universal Host Controller - 2834 0x0000C800-0x0000C81F Intel(R) ICH8 Family USB Universal Host Controller - 2832 ′ Page: B-5 SA-5082 USER S MANUAL...
  • Page 85 Intel(R) ICH8M 3 port Serial ATA Storage 0x0000DC07 Controller - 2828 0x0000E000-0x0000EFFF Intel(R) ICH8 Family PCI Express Root Port 1 - 283F 0x0000EC00-0x0000EC1F Intel(R) 82574L Gigabit Network Connection 0x0000FFA0-0x0000FFAF Intel(R) ICH8M Ultra ATA Storage Controllers - 2850 Page: B-6 ′ SA-5082 USER S MANUAL...
  • Page 86 (3) Exit the extended function mode To exit the Extended Function Mode, writing 0xAA to the EFER is required. Once SuperIO exits the Extended Function Mode, it goes back to the normal running mode. ′ Page: B-7 SA-5082 USER S MANUAL...
  • Page 87 ;------ Logic device activation for watch dog timer ----------------------------------------- 030h ;------ Set second as counting unit ------------------------------------------------------------- 0F5h not 08h ;------ Set timeout interval as 30seconds and start counting -------------------------------- 0F6h ;------ Exit the extended function mode ------------------------------------------------------- 0AAh Page: B-8 ′ SA-5082 USER S MANUAL...
  • Page 88 Boot Device [SATA: PM-WDC WD1600] parenthesis has been disabled in the corresponding type menu. Select Screen Select Item Change Option General Help F10 Save and Exit ESC: Exit v02.68 (c)Copyright 1985-2009 American Megatrends, Inc. ′ Page: B-9 SA-5082 USER S MANUAL...
  • Page 89 You can type “AFUDOS/?” to see all the definition of each control options. The recommend option for BIOS BIN update include following parameters: Program main BIOS image. /B: Program Boot Block. /N: Program NVRAM. /C: Destroy CMOS checksum /X: Don’t check ROM ID. Page: B-10 ′ SA-5082 USER S MANUAL...
  • Page 90 After BIOS update procedures complete, the messages should be like the figure shown below. You can restart the system and boot up with new BIOS now. ′ Page: B-11 SA-5082 USER S MANUAL...

Table of Contents