MOLEAER lotus Quick Start Manual

Nanobubble generator

Hide thumbs Also See for lotus:

MOLEAER LOTUS

NANOBUBBLE GENERATOR

OXYGEN CONCENTRATOR ADD-ON

IMPORTANT: READ, FOLLOW AND

SAVE THESE INSTRUCTIONS

CUSTOMER SERVICE / TECHNICAL SUPPORT

If you have questions or need to order

replacement parts, please contact:

CUSTOMER SERVICE:

Monday to Friday: 8:00 a.m. to 5:00 p.m. PST

Phone: +1 (424) 558-3567

Email: info@moleaer.com

WEBSITE:

www.moleaer.com

Table of Contents

Need help?

Do you have a question about the lotus and is the answer not in the manual?

Page 1 If you have questions or need to order replacement parts, please contact: CUSTOMER SERVICE: Monday to Friday: 8:00 a.m. to 5:00 p.m. PST Phone: +1 (424) 558-3567 Email: info@moleaer.com WEBSITE: www.moleaer.com MOLEAER LOTUS NANOBUBBLE GENERATOR OXYGEN CONCENTRATOR ADD-ON IMPORTANT: READ, FOLLOW AND SAVE THESE INSTRUCTIONS...
Page 2: Installation
The oxygen generator adaptor kit allows for utilizing an oxygen generator as the oxygen source. The kit has safety features built into it to allow for turning the oxygen generator off when the Lotus unit is shut down. It also repressurizes the oxygen to the required operating pressure.
Page 3: Start-Up Instructions
7. Connect the gas tubing of the oxygen outlet of the oxygen generator to the port labeled 8. Connect the second gas tubing to the outlet of the oxygen conversion box and the oxygen inlet port on the Lotus unit labeled 9.
Page 4: Maintenance
(as indicated on the Lotus pressure gauge) will start going up. 14. Visually check bubbles from the outlet of the Lotus unit (located in water) to make sure bubbles are coming out of the unit.
Page 5 Components www.moleaer.com...
Page 6 3232 WEST EL SEGUNDO BLVD. HAWTHORNE, CA 90250 USA +1-424-558-3567 info@moleaer.com www.moleaer.com Revision 01312023 www.moleaer.com...