Table of Contents
Advertisement
Operation
1
2
3
4
5
10
Fig. 12 System overview
[1]
Key to return to the main menu
[2]
Display of date and time
[3]
Status display of Wi-Fi active, radio transmission active (for
wireless sensor) and internet connection active
[4]
Display of outdoor air temperature
[5]
Display of temperatures to and from the outdoor unit
[6]
Help menu
[7]
Display of flow temperature
[8]
Display of return temperature
[9]
Display of DHW temperature
[10] More..., for additional settings
8
More...
Menu item
Settings
6
7
8
9
0010044162-001
Heat pump
status
Statistics
Table 2 More settings
3
Material damage from frost!
The heating or auxiliary heater may be irreparably damaged by frost.
▶ Do not start the heat pump if there is a possibility of the heating or
auxiliary heater being frozen.
Description
▶ Alternating operation. Select On to activate DHW
alternating operation. Select Off to deactivate
DHW alternating operation.
▶ Time prog., add. heater.
– Select On to activate time program. Select
Off to deactivate time program.
– Edit. Setting a time program for the booster
heater.
– Reset. To reset, press Yes. To return without
resetting, press No.
– Time prog. min. outdoor temp.. Select the
temperature limit to automatically disable the
booster heater program.
▶ PV system
– Incr. the desired temp.. The energy available
in the PV system is used for heating, if the
system is in heating mode.
Set how much the room temperature may be
increased.
– Greater hot water covenience. The energy
available in the PV system is used for DHW.
[Yes] | [No]
If enabled the DHW is heated to the
temperature set for DHW operating mode
[Comfort]. No DHW heating is done if the
holiday program is active.
– Red. the desired temp.. The energy available
in the PV system is used for cooling, if the
system is in cooling mode.
– Cooling only with PV energy. Cooling mode is
activated only if energy is available in the PV
system.
[Yes] | [No]
No cooling is done if the holiday program is
active.
▶ Smart grid
– Selectable rise. Set how much the room
temperature may be increased.
– Greater hot water covenience [Yes] | [No]
If enabled the DHW is heated to the
temperature set for DHW operating mode
[Comfort]. No heating is done if the holiday
program is active.
▶ Restore installer settings. To return to saved
installer settings, select Yes; to exit without
making any changes, select No.
▶ Shows the heat pump's operating status.
▶ Shows the statistics for the heat pump
operation.
Operation
WARNING
Compress 5800iAW 12 E | OR-S | T – 6721871228 (2023/06)
Advertisement
Table of Contents
