Table of Contents
Advertisement
Menu > Holiday
Menu item
Description
Holiday
▶ From. Set the start date/time for absence: the
holiday program starts at the set date/time.
Select Confirm to confirm or Cancel to return
without making changes.
▶ To:. Set the end date/time for absence: the
holiday program ends at the set date/time.
Select Confirm to confirm or Cancel to return
without making changes.
Click on Advanced settings for additional settings.
Apply settings to Select which functions (heating circuits, DHW
production and ventilation) that will be controlled by
the holiday setting.
Heating
Select how DHW production will be controlled by the
holiday setting.
▶ Off. To switch off heat production for the set
time.
▶ On. To change to set temperature for the set
time.
Desired room
[10...17...30] °C. Set the desired room
temp.
temperature for the period that the holiday function
is activated.
Select Confirm to confirm
-or-
Cancel to return without making changes.
Hot water
Select which DHW setting should be active during
the holiday setting.
▶ Off. To switch off DHW production for the set
time.
▶ Eco+. To change DHW production to Eco+ for the
set time.
▶ Eco. To change DHW production to Eco for the
set time.
▶ Comfort. To change DHW production to Comfort
for the set time.
Ventilation
Select how ventilation will be controlled by the
holiday setting.
▶ Off. To switch off ventilation for the set time.
▶ Level. [1...4]. To set the ventilation level for the
set time.
▶ Demand. To set the demand-controlled
ventilation for the set time.
Table 6 Holiday settings
CAUTION
Risk of system damage!
▶ Before a prolonged period of absence, only change the settings
under Holiday.
▶ After a long absence, check the operating pressure of the heating
system.
4.3
Solar
Information about the solar thermal system is shown in the information
menu. No changes can be made in this menu.
Menu item
Description
Solar
▶ Shows the solar thermal system configuration.
Click on Advanced settings for additional settings.
Compress 5800iAW 12 E | OR-S | T – 6721871228 (2023/06)
Menu item
Description
Solar sensor
▶ Shows the system sensors
overview
Solar yield
▶ Shows statistics on energy produced
overview
Table 7 Information menu that shows the status and energy production
of the solar thermal system
4.4
Energy
The energy statistics of the system are indicated in this menu. Only the
information on functions and accessory components actually installed in
the heat pump and in the system are displayed.
Meu item
Description
Energy
Display of the system energy statistics. Overview of
the total energy generated, specified by energy
source, e.g. proportion of ambient energy,
proportion of the heat pump (electricity energy for
compressor operation) and proportion of auxiliary
heater.
• Select Total to display the energy statistics of the
system since being commissioned.
• To display the statistics for a specific year, select
the respective year. Display the statistics since
commissioning.
Select More... to display more energy statistics.
Energy
Display of the statistics for energy consumption.
consump.
Select Total or a specific year.
• Total
• Heating
• Cooling
• Hot water
• Ventilation
Produced Energy
Display of the statistics for energy generation.
Total
Select Total or a specific year.
• Total
• Heating
• Cooling
• Hot water
• Ventilation
Efficiency
Display of the statistics for effectiveness. Select
Total or a specific year.
• Total
• Heating
• Cooling
• Hot water
• Ventilation
Reset
Resetting the yearly energy statistics. Select Yes to
reset. The values since commissioning are not
deleted.
-or-
Select No to go back without resetting.
Table 8 "Energy staistics" menu
Main menu
11
Advertisement
Table of Contents
