Cutter Deck Installation (Travel without Deck)
The tension cradle at the front of the tractor must be secured and tension rod removed when the unit is used without a
deck. The process outlined here instructs how to secure the cradle.
1
FULLY ASSEMBLED BRACKET SECTION START POINT
fig. L
3
REMOVE ROD FIXINGS
fig. 19
fig. N
5
FIT ROD PUSH PIN INTO HANDLE SLOT
fig. P
7
REPLACE HANDLE PIN
fig. 21
fig. R
2
REMOVE PIN
fig. M
4
PUSH HANDLE INTO BRACKET
fig. 20
fig. O
6
SECURE PUSH PIN WITH ROD FIXINGS
fig. Q
8
END
REVERSE PROCESS TO ASSEMBLE
fig. S
Page 34