Countax B MK4 Series Operator's Manual page 19

Net Up Icon
(Fig. 17 - Circle S)
The net has two operation positions.
The raised position is for net
emptying and travel without grass
collection (fig. 17Q). The net must be
in the down or lower position in order
to collect grass trimmings (fig. 17R). The net up icon
(fig. 17S) remains lit if the net is raised. To raise and
lower the net manually operate the PGC lift lever on
the right hand side of the tractor as shown (fig. 17Q
& 17R).
Do not lower the net over non grass cutting terrain.
The PGC and net are designed to travel over grass
and improper use can lead to excessive wear or
damage.
Net Full Icon
(Fig. 18)
For models where net full indicator
is fitted only. The icon appears when
maximum net capacity is reached. It
is not possible to collect any further
grass cuttings. Perform the net
empty operation before attempting any further
cutting operation.
Net Tipping Icon
(Fig. 19 - Circle T)
The net tipping icon appears while
the net contents are being ejected
(fig. 19T). The net must be placed in
the raised position (fig. 17Q) to eject
contents. In order to set net empty
position extend the net handle (fig. 19U) and pull
towards seat (fig. 19V). Hold the net in the empty
position until contents are completely ejected.
Reposition and lower the handle to the start position
before attempting to continue cutting operation.
Dashboard Display and Controls
R
U
Page 19
Q
S
Net Full Indicator
V
T
fig. 17
fig. 18
fig. 19