Table of Contents
Advertisement
4.2 Your Choice of Coatings and Viscosity
Extremely thin, watery or light bodied fluids such as inks, aniline dyes and oil stains can generally be used straight from t he
can. RTS or Ready to Spray water-based finishing products are formulated to be used straight from the can without thinning
with a 3 stage or larger turbine. Most other coating products will need to be thinned anywhere from 10% to 50% depending
on the available air pressure of the turbine model and the properties of the coating selected. (see chart on next page).
Chart A - Nozzle, Needle and Air Caps For 7600 Series Spray Guns
Page 10
Advertisement
Table of Contents
Need help?
Do you have a question about the MAXI-MISER PRECISION-6 PRO and is the answer not in the manual?
Questions and answers