Management - Star Micronics TSP100IIIU Software Manual

4.1.4. Management

(1) Log output settings
This is used to record logs and identify causes when communication errors occur.
(2) Clone Serial Number Settings << TSP100IIIW / TSP100IIILAN only >>
If the clone serial number is set for the printer, the clone serial number is treated as the product serial
number by the printer's system that identifies it using the product serial number.
If you change the printer due to a repair, etc, the printer can be recognized on the system as being the
same as the previous printer by setting the clone serial number as a replacement printer.
Clone Serial Number:
- Supported characters are: "a" - "z", "A" - "Z", and "0" - "9".
- A maximum of 16 characters can be used.
88
Software Manual